{
  "assigner": "ENISA",
  "date_reserved": "2026-10-02T08:35:58.823186+00:00",
  "id": "EUVD-2026-367112"
}

{
  "affected": [
    {
      "affectedData": [
        {
          "product": "tesseract",
          "vendor": "tesseract-ocr",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c= 5.5.3"
            }
          ]
        }
      ],
      "source": "security-advisories@github.com"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:tesseract-ocr:tesseract_ocr:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "EF20D761-42A3-47CC-A85C-4A7C2EECE5F5",
              "versionEndIncluding": "5.5.3",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "Tesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review."
    }
  ],
  "id": "CVE-2026-88052",
  "lastModified": "2026-09-16T16:21:10.677",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "REQUIRED",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "security-advisories@github.com",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-88052",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2026-09-11T16:48:33.418715Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2026-09-10T18:18:14.317",
  "references": [
    {
      "source": "security-advisories@github.com",
      "tags": [
        "Patch"
      ],
      "url": "https://github.com/tesseract-ocr/tesseract/commit/2d04d640db2e8c7e3bab2369d599343b5a8b8443"
    },
    {
      "source": "security-advisories@github.com",
      "tags": [
        "Exploit",
        "Mitigation",
        "Vendor Advisory"
      ],
      "url": "https://github.com/tesseract-ocr/tesseract/security/advisories/GHSA-2hm8-q5c7-c373"
    }
  ],
  "sourceIdentifier": "security-advisories@github.com",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-129"
        },
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ],
      "source": "security-advisories@github.com",
      "type": "Secondary"
    }
  ]
}

{
  "affected": [
    {
      "ecosystem_specific": {
        "aarch64": [
          "tesseract-5.5.3-3.oe2203sp4.aarch64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2203sp4.aarch64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2203sp4.aarch64.rpm",
          "tesseract-devel-5.5.3-3.oe2203sp4.aarch64.rpm",
          "tesseract-tools-5.5.3-3.oe2203sp4.aarch64.rpm"
        ],
        "src": [
          "tesseract-5.5.3-3.oe2203sp4.src.rpm"
        ],
        "x86_64": [
          "tesseract-5.5.3-3.oe2203sp4.x86_64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2203sp4.x86_64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2203sp4.x86_64.rpm",
          "tesseract-devel-5.5.3-3.oe2203sp4.x86_64.rpm",
          "tesseract-tools-5.5.3-3.oe2203sp4.x86_64.rpm"
        ]
      },
      "package": {
        "ecosystem": "openEuler:22.03-LTS-SP4",
        "name": "tesseract",
        "purl": "pkg:rpm/openEuler/tesseract\u0026distro=openEuler-22.03-LTS-SP4"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "5.5.3-3.oe2203sp4"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "database_specific": {
    "severity": "High"
  },
  "details": "A commercial quality OCR engine originally developed at HP between 1985 and 1995. In 1995, this engine was among the top 3 evaluated by UNLV. It was open-sourced by HP and UNLV in 2005.\r\n\r\nSecurity Fix(es):\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadNormProtos in src/classify/normmatch.cpp parses the NORMPROTO component of a .traineddata file and uses std::istream::operator\u0026gt;\u0026gt;(char*) to extract a whitespace-delimited token into a fixed 61-byte stack buffer without setting a stream width. The 100-byte line buffer can carry a token of up to 99 characters, so a token longer than 60 characters writes up to 39 attacker-controlled bytes past the buffer during TessBaseAPI::Init of the legacy engine, causing stack corruption, denial of service, and potentially control-flow hijacking on affected standard-library implementations. Builds using Apple\u0026apos;s libc++ C++20 bounded array overload are incidentally protected, while typical libstdc++ builds remain affected. No fixed release is available as of this review.(CVE-2026-88047)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88048)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88049)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review.(CVE-2026-88050)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, the callback form of GenericVector::read in src/ccutil/genericvector.h reads the independent int32 fields reserved and size_used_ from a .traineddata model without a cap or an invariant check. reserve(reserved) allocates the backing array, but the callback loop writes size_used_ elements. A crafted TESSDATA_INTTEMP component with version_id 4 or later can therefore set reserved to a small value and size_used_ to a large value when fontinfo_table_.read(fp, read_info) is called from src/classify/intproto.cpp, causing a heap out-of-bounds write of FontInfo structures, heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88051)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88052)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88053)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.(CVE-2026-88054)",
  "id": "OESA-2026-4107",
  "modified": "2026-09-25T01:28:28Z",
  "published": "2026-09-25T01:28:28Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4107"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88047"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88048"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88049"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88050"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88051"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88052"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88053"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88054"
    }
  ],
  "schema_version": "1.7.2",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "tesseract security update",
  "upstream": [
    "CVE-2026-88047",
    "CVE-2026-88048",
    "CVE-2026-88049",
    "CVE-2026-88050",
    "CVE-2026-88051",
    "CVE-2026-88052",
    "CVE-2026-88053",
    "CVE-2026-88054"
  ]
}

{
  "affected": [
    {
      "ecosystem_specific": {
        "aarch64": [
          "tesseract-5.5.3-3.oe2403sp1.aarch64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp1.aarch64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp1.aarch64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp1.aarch64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp1.aarch64.rpm"
        ],
        "src": [
          "tesseract-5.5.3-3.oe2403sp1.src.rpm"
        ],
        "x86_64": [
          "tesseract-5.5.3-3.oe2403sp1.x86_64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp1.x86_64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp1.x86_64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp1.x86_64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp1.x86_64.rpm"
        ]
      },
      "package": {
        "ecosystem": "openEuler:24.03-LTS-SP1",
        "name": "tesseract",
        "purl": "pkg:rpm/openEuler/tesseract\u0026distro=openEuler-24.03-LTS-SP1"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "5.5.3-3.oe2403sp1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "database_specific": {
    "severity": "High"
  },
  "details": "A commercial quality OCR engine originally developed at HP between 1985 and 1995. In 1995, this engine was among the top 3 evaluated by UNLV. It was open-sourced by HP and UNLV in 2005.\r\n\r\nSecurity Fix(es):\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadNormProtos in src/classify/normmatch.cpp parses the NORMPROTO component of a .traineddata file and uses std::istream::operator\u0026gt;\u0026gt;(char*) to extract a whitespace-delimited token into a fixed 61-byte stack buffer without setting a stream width. The 100-byte line buffer can carry a token of up to 99 characters, so a token longer than 60 characters writes up to 39 attacker-controlled bytes past the buffer during TessBaseAPI::Init of the legacy engine, causing stack corruption, denial of service, and potentially control-flow hijacking on affected standard-library implementations. Builds using Apple\u0026apos;s libc++ C++20 bounded array overload are incidentally protected, while typical libstdc++ builds remain affected. No fixed release is available as of this review.(CVE-2026-88047)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88048)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88049)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review.(CVE-2026-88050)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, the callback form of GenericVector::read in src/ccutil/genericvector.h reads the independent int32 fields reserved and size_used_ from a .traineddata model without a cap or an invariant check. reserve(reserved) allocates the backing array, but the callback loop writes size_used_ elements. A crafted TESSDATA_INTTEMP component with version_id 4 or later can therefore set reserved to a small value and size_used_ to a large value when fontinfo_table_.read(fp, read_info) is called from src/classify/intproto.cpp, causing a heap out-of-bounds write of FontInfo structures, heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88051)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88052)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88053)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.(CVE-2026-88054)",
  "id": "OESA-2026-4108",
  "modified": "2026-09-25T01:28:29Z",
  "published": "2026-09-25T01:28:29Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4108"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88047"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88048"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88049"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88050"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88051"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88052"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88053"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88054"
    }
  ],
  "schema_version": "1.7.2",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "tesseract security update",
  "upstream": [
    "CVE-2026-88047",
    "CVE-2026-88048",
    "CVE-2026-88049",
    "CVE-2026-88050",
    "CVE-2026-88051",
    "CVE-2026-88052",
    "CVE-2026-88053",
    "CVE-2026-88054"
  ]
}

{
  "affected": [
    {
      "ecosystem_specific": {
        "aarch64": [
          "tesseract-5.5.3-3.oe2403sp3.aarch64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp3.aarch64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp3.aarch64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp3.aarch64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp3.aarch64.rpm"
        ],
        "src": [
          "tesseract-5.5.3-3.oe2403sp3.src.rpm"
        ],
        "x86_64": [
          "tesseract-5.5.3-3.oe2403sp3.x86_64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp3.x86_64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp3.x86_64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp3.x86_64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp3.x86_64.rpm"
        ]
      },
      "package": {
        "ecosystem": "openEuler:24.03-LTS-SP3",
        "name": "tesseract",
        "purl": "pkg:rpm/openEuler/tesseract\u0026distro=openEuler-24.03-LTS-SP3"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "5.5.3-3.oe2403sp3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "database_specific": {
    "severity": "High"
  },
  "details": "A commercial quality OCR engine originally developed at HP between 1985 and 1995. In 1995, this engine was among the top 3 evaluated by UNLV. It was open-sourced by HP and UNLV in 2005.\r\n\r\nSecurity Fix(es):\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadNormProtos in src/classify/normmatch.cpp parses the NORMPROTO component of a .traineddata file and uses std::istream::operator\u0026gt;\u0026gt;(char*) to extract a whitespace-delimited token into a fixed 61-byte stack buffer without setting a stream width. The 100-byte line buffer can carry a token of up to 99 characters, so a token longer than 60 characters writes up to 39 attacker-controlled bytes past the buffer during TessBaseAPI::Init of the legacy engine, causing stack corruption, denial of service, and potentially control-flow hijacking on affected standard-library implementations. Builds using Apple\u0026apos;s libc++ C++20 bounded array overload are incidentally protected, while typical libstdc++ builds remain affected. No fixed release is available as of this review.(CVE-2026-88047)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88048)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88049)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review.(CVE-2026-88050)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, the callback form of GenericVector::read in src/ccutil/genericvector.h reads the independent int32 fields reserved and size_used_ from a .traineddata model without a cap or an invariant check. reserve(reserved) allocates the backing array, but the callback loop writes size_used_ elements. A crafted TESSDATA_INTTEMP component with version_id 4 or later can therefore set reserved to a small value and size_used_ to a large value when fontinfo_table_.read(fp, read_info) is called from src/classify/intproto.cpp, causing a heap out-of-bounds write of FontInfo structures, heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88051)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88052)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88053)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.(CVE-2026-88054)",
  "id": "OESA-2026-4109",
  "modified": "2026-09-25T01:28:30Z",
  "published": "2026-09-25T01:28:30Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4109"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88047"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88048"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88049"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88050"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88051"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88052"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88053"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88054"
    }
  ],
  "schema_version": "1.7.2",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "tesseract security update",
  "upstream": [
    "CVE-2026-88047",
    "CVE-2026-88048",
    "CVE-2026-88049",
    "CVE-2026-88050",
    "CVE-2026-88051",
    "CVE-2026-88052",
    "CVE-2026-88053",
    "CVE-2026-88054"
  ]
}

{
  "affected": [
    {
      "ecosystem_specific": {
        "aarch64": [
          "tesseract-5.5.3-3.oe2403sp4.aarch64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp4.aarch64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp4.aarch64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp4.aarch64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp4.aarch64.rpm"
        ],
        "src": [
          "tesseract-5.5.3-3.oe2403sp4.src.rpm"
        ],
        "x86_64": [
          "tesseract-5.5.3-3.oe2403sp4.x86_64.rpm",
          "tesseract-debuginfo-5.5.3-3.oe2403sp4.x86_64.rpm",
          "tesseract-debugsource-5.5.3-3.oe2403sp4.x86_64.rpm",
          "tesseract-devel-5.5.3-3.oe2403sp4.x86_64.rpm",
          "tesseract-tools-5.5.3-3.oe2403sp4.x86_64.rpm"
        ]
      },
      "package": {
        "ecosystem": "openEuler:24.03-LTS-SP4",
        "name": "tesseract",
        "purl": "pkg:rpm/openEuler/tesseract\u0026distro=openEuler-24.03-LTS-SP4"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "5.5.3-3.oe2403sp4"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "database_specific": {
    "severity": "High"
  },
  "details": "A commercial quality OCR engine originally developed at HP between 1985 and 1995. In 1995, this engine was among the top 3 evaluated by UNLV. It was open-sourced by HP and UNLV in 2005.\r\n\r\nSecurity Fix(es):\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadNormProtos in src/classify/normmatch.cpp parses the NORMPROTO component of a .traineddata file and uses std::istream::operator\u0026gt;\u0026gt;(char*) to extract a whitespace-delimited token into a fixed 61-byte stack buffer without setting a stream width. The 100-byte line buffer can carry a token of up to 99 characters, so a token longer than 60 characters writes up to 39 attacker-controlled bytes past the buffer during TessBaseAPI::Init of the legacy engine, causing stack corruption, denial of service, and potentially control-flow hijacking on affected standard-library implementations. Builds using Apple\u0026apos;s libc++ C++20 bounded array overload are incidentally protected, while typical libstdc++ builds remain affected. No fixed release is available as of this review.(CVE-2026-88047)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88048)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88049)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review.(CVE-2026-88050)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, the callback form of GenericVector::read in src/ccutil/genericvector.h reads the independent int32 fields reserved and size_used_ from a .traineddata model without a cap or an invariant check. reserve(reserved) allocates the backing array, but the callback loop writes size_used_ elements. A crafted TESSDATA_INTTEMP component with version_id 4 or later can therefore set reserved to a small value and size_used_ to a large value when fontinfo_table_.read(fp, read_info) is called from src/classify/intproto.cpp, causing a heap out-of-bounds write of FontInfo structures, heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88051)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88052)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.(CVE-2026-88053)\n\nTesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.(CVE-2026-88054)",
  "id": "OESA-2026-4110",
  "modified": "2026-09-25T01:28:30Z",
  "published": "2026-09-25T01:28:30Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4110"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88047"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88048"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88049"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88050"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88051"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88052"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88053"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-88054"
    }
  ],
  "schema_version": "1.7.2",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "tesseract security update",
  "upstream": [
    "CVE-2026-88047",
    "CVE-2026-88048",
    "CVE-2026-88049",
    "CVE-2026-88050",
    "CVE-2026-88051",
    "CVE-2026-88052",
    "CVE-2026-88053",
    "CVE-2026-88054"
  ]
}

{
  "affected": [
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract3",
            "binary_version": "3.03.02-3"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "3.03.02-3"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:14.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@3.03.02-3?arch=source\u0026distro=trusty"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "3.02.02-1",
        "3.03.02-3"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract3",
            "binary_version": "3.04.01-4"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "3.04.01-4"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "3.04.01-4"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:16.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@3.04.01-4?arch=source\u0026distro=xenial"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "3.04.00-5ubuntu1",
        "3.04.01-2",
        "3.04.01-4"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract4",
            "binary_version": "4.00~git2288-10f4998a-2"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "4.00~git2288-10f4998a-2"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "4.00~git2288-10f4998a-2"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:18.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@4.00~git2288-10f4998a-2?arch=source\u0026distro=bionic"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "3.04.01-6",
        "3.04.01-6build1",
        "3.04.01-6build2",
        "4.00~git2188-cdc35338-4build1",
        "4.00~git2188-cdc35338-5",
        "4.00~git2207-766b7bd6-3.1",
        "4.00~git2219-40f43111-1.2",
        "4.00~git2288-10f4998a-2"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract4",
            "binary_version": "4.1.1-2build2"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "4.1.1-2build2"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "4.1.1-2build2"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:20.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@4.1.1-2build2?arch=source\u0026distro=focal"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "4.1.0-1",
        "4.1.0-2",
        "4.1.1-1",
        "4.1.1-2",
        "4.1.1-2build1",
        "4.1.1-2build2"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract4",
            "binary_version": "4.1.1-2.1build1"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "4.1.1-2.1build1"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "4.1.1-2.1build1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:22.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@4.1.1-2.1build1?arch=source\u0026distro=jammy"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "4.1.1-2.1",
        "4.1.1-2.1build1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract5",
            "binary_version": "5.3.4-1build5"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "5.3.4-1build5"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "5.3.4-1build5"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:24.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@5.3.4-1build5?arch=source\u0026distro=noble"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "5.3.0-2build1",
        "5.3.3-1",
        "5.3.3-1build1",
        "5.3.4-1",
        "5.3.4-1build3",
        "5.3.4-1build4",
        "5.3.4-1build5"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libtesseract5",
            "binary_version": "5.5.0-1build1"
          },
          {
            "binary_name": "tesseract-ocr",
            "binary_version": "5.5.0-1build1"
          },
          {
            "binary_name": "tesseract-ocr-all",
            "binary_version": "5.5.0-1build1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:26.04:LTS",
        "name": "tesseract",
        "purl": "pkg:deb/ubuntu/tesseract@5.5.0-1build1?arch=source\u0026distro=resolute"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "5.5.0-1",
        "5.5.0-1build1"
      ]
    }
  ],
  "aliases": [],
  "details": "Tesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.",
  "id": "UBUNTU-CVE-2026-88052",
  "modified": "2026-09-16T11:43:12Z",
  "published": "2026-09-10T18:18:00Z",
  "references": [
    {
      "type": "REPORT",
      "url": "https://ubuntu.com/security/CVE-2026-88052"
    },
    {
      "type": "REPORT",
      "url": "https://www.cve.org/CVERecord?id=CVE-2026-88052"
    }
  ],
  "related": [],
  "schema_version": "1.7.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    },
    {
      "score": "medium",
      "type": "Ubuntu"
    }
  ],
  "upstream": [
    "CVE-2026-88052"
  ]
}