Vulnerability-Lookup

PYSEC-2026-291

Vulnerability from pysec - Published: 2026-06-29 11:50 - Updated: 2026-07-01 20:22

Details

Summary

In backpropagate >= 1.1.0, the optional Reflex web UI (pip install backpropagate[ui], launched via backprop ui) exposes a training control plane: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push.

The CLI accepts two operator-facing flags intended as security controls:

--auth user:pass — documented as "require HTTP Basic authentication on every request to the UI."
--share — documented as "expose the UI on a public address; requires --auth."

When --auth user:pass is passed, the CLI prints Auth: enabled (user: <username>) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend.

The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port — local or remote, depending on whether --share is used — has full UI access.

An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: "For Phase 1 the variable is exported but Reflex doesn't read it yet." This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced.

This advisory is filed primarily because the runtime contradicted an operator-facing security claim. Code-only bugs of comparable shape (auth check missing entirely from a path) would already warrant disclosure; the additional false-promise dimension raises the severity.

Impact

An attacker who reaches the bound port can:

Read uploaded datasets rendered in the UI preview, including content of any JSONL/CSV/TXT file the legitimate operator has uploaded for fine-tuning.
Trigger arbitrary training runs against any base model the operator has installed locally or that can be downloaded from HuggingFace.
Trigger HuggingFace Hub pushes to repositories named via the UI input (subject to the operator's local HF token's scope — typically all repos owned by the operator).
Cause disk-fill DoS via the rx.upload endpoint (no size cap, no extension filter, no per-session count cap in v1.1.0 / v1.1.1).
Read model paths (source_model_path, dataset_path, model, uploaded_path) which are user-supplied and bypass the safe_path() helper that lives in backpropagate/ui_security.py (path validation is dead code on the Reflex surface in v1.1.0 / v1.1.1).

The combination of unauthenticated training control, HF push target spoofing, and path-input traversal makes the affected endpoint suitable for both data exfiltration (reading uploaded training data) and supply-chain attacks (pushing tampered model weights to the operator's HF account).

The local-only default (no --share) reduces exposure to a host-local attacker. The --share flag is documented as a "public URL" feature; operators who used --share --auth user:pass had no warning that the auth half was inert.

Patches

Fixed in v1.2.0 (released 2026-05-23). The patch implements real ASGI middleware via rx.App(api_transformer=basic_auth_transformer) that gates HTTP routes AND the /_event WebSocket upgrade. Four modes (no_auth_local_only / token_auto / explicit_creds / production), HMAC-signed cookie validated PRE-websocket.accept(), Host + Origin allowlists. The middleware ships alongside a 4-layer defense in depth at the cli.py / ui_app/app.py / rxconfig.py / env-strip surfaces so direct python -m reflex run invocations (bypassing the CLI guard) also enforce authentication.

Upgrade with:

pip: pip install --upgrade backpropagate
npm: npm install -g @mcptoolshop/backpropagate@latest

Full release notes: https://github.com/mcp-tool-shop-org/backpropagate/blob/main/CHANGELOG.md#120---2026-05-23

Workarounds

If users cannot upgrade immediately:

Do not pass --auth or --share to backprop ui. Run the UI with no flags (backprop ui); it will bind to localhost and accept any client that can reach 127.0.0.1.
For remote access, use SSH port-forwarding instead of --share: # On the client: ssh -L 7860:localhost:7860 <training-host> # On the server: backprop ui # no --share # Then open http://localhost:7860 in your local browser. SSH provides the authentication layer the Reflex UI did not.
Audit existing deployments. If any host running backpropagate >= 1.1.0 has previously been launched with --share, treat any uploaded training data, model paths, or HF push targets visible in that UI session as potentially exposed. Re-issue HF tokens that have been in use during such sessions.

Binary distribution gap. Standalone binaries (Windows .exe / macOS .app via PyInstaller) failed to build for v1.2.0 and will land in a follow-up patch release. In the interim, users who relied on the v1.1.x binary distribution should install the patched version via pip install backpropagate==1.2.0 to receive the auth-bypass fix. The v1.2.0 PyPI package and @mcptoolshop/backpropagate@1.2.0 npm package both carry the patched code.

Credit

Discovered by the dogfood-swarm Stage A audit on 2026-05-22 (finding ID FRONTEND-A-001, classified CRITICAL). The audit also surfaced contradicting documentation in CHANGELOG / SHIP_GATE / README; those were corrected in v1.2.0 alongside the runtime fix.

Severity

9.3 (Critical)


                  
                    CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Impacted products

Name	purl
backpropagate	pkg:pypi/backpropagate

Aliases

JSON

To clipboard

{
  "affected": [
    {
      "package": {
        "ecosystem": "PyPI",
        "name": "backpropagate",
        "purl": "pkg:pypi/backpropagate"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "1.1.0"
            },
            {
              "fixed": "1.2.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.1.0",
        "1.1.1"
      ]
    }
  ],
  "aliases": [
    "CVE-2026-48797",
    "GHSA-f65r-h4g3-3h9h"
  ],
  "details": "## Summary\n\nIn `backpropagate \u003e= 1.1.0`, the optional Reflex web UI (`pip install backpropagate[ui]`, launched via `backprop ui`) exposes a training control plane: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push.\n\nThe CLI accepts two operator-facing flags intended as security controls:\n\n- `--auth user:pass` \u2014 documented as \"require HTTP Basic authentication on every request to the UI.\"\n- `--share` \u2014 documented as \"expose the UI on a public address; requires `--auth`.\"\n\nWhen `--auth user:pass` is passed, the CLI prints `Auth: enabled (user: \u003cusername\u003e)` to confirm to the operator that authentication is active, then exports `BACKPROPAGATE_UI_AUTH=user:pass` to the subprocess that launches the Reflex backend.\n\n**The Reflex backend (`backpropagate/ui_app/**`) never reads `BACKPROPAGATE_UI_AUTH`.** No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port \u2014 local or remote, depending on whether `--share` is used \u2014 has full UI access.\n\nAn inline comment at `backpropagate/cli.py:1217-1218` in the v1.1.0 source documents the gap: *\"For Phase 1 the variable is exported but Reflex doesn\u0027t read it yet.\"* This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced.\n\nThis advisory is filed primarily because the runtime contradicted an operator-facing security claim. Code-only bugs of comparable shape (auth check missing entirely from a path) would already warrant disclosure; the additional false-promise dimension raises the severity.\n\n## Impact\n\nAn attacker who reaches the bound port can:\n\n- **Read uploaded datasets** rendered in the UI preview, including content of any JSONL/CSV/TXT file the legitimate operator has uploaded for fine-tuning.\n- **Trigger arbitrary training runs** against any base model the operator has installed locally or that can be downloaded from HuggingFace.\n- **Trigger HuggingFace Hub pushes** to repositories named via the UI input (subject to the operator\u0027s local HF token\u0027s scope \u2014 typically all repos owned by the operator).\n- **Cause disk-fill DoS** via the `rx.upload` endpoint (no size cap, no extension filter, no per-session count cap in v1.1.0 / v1.1.1).\n- **Read model paths** (`source_model_path`, `dataset_path`, `model`, `uploaded_path`) which are user-supplied and bypass the `safe_path()` helper that lives in `backpropagate/ui_security.py` (path validation is dead code on the Reflex surface in v1.1.0 / v1.1.1).\n\nThe combination of unauthenticated training control, HF push target spoofing, and path-input traversal makes the affected endpoint suitable for both data exfiltration (reading uploaded training data) and supply-chain attacks (pushing tampered model weights to the operator\u0027s HF account).\n\nThe local-only default (no `--share`) reduces exposure to a host-local attacker. The `--share` flag is documented as a \"public URL\" feature; operators who used `--share --auth user:pass` had no warning that the auth half was inert.\n\n## Patches\n\nFixed in **v1.2.0** (released 2026-05-23). The patch implements real ASGI middleware via `rx.App(api_transformer=basic_auth_transformer)` that gates HTTP routes AND the `/_event` WebSocket upgrade. Four modes (`no_auth_local_only` / `token_auto` / `explicit_creds` / `production`), HMAC-signed cookie validated PRE-`websocket.accept()`, Host + Origin allowlists. The middleware ships alongside a 4-layer defense in depth at the cli.py / ui_app/app.py / rxconfig.py / env-strip surfaces so direct `python -m reflex run` invocations (bypassing the CLI guard) also enforce authentication.\n\nUpgrade with:\n \n- pip: `pip install --upgrade backpropagate`\n- npm: `npm install -g @mcptoolshop/backpropagate@latest`\n \nFull release notes: https://github.com/mcp-tool-shop-org/backpropagate/blob/main/CHANGELOG.md#120---2026-05-23\n \n## Workarounds\n\nIf users cannot upgrade immediately:\n\n1. **Do not pass `--auth` or `--share` to `backprop ui`.** Run the UI with no flags (`backprop ui`); it will bind to `localhost` and accept any client that can reach `127.0.0.1`.\n2. **For remote access, use SSH port-forwarding** instead of `--share`:\n   ```\n   # On the client:\n   ssh -L 7860:localhost:7860 \u003ctraining-host\u003e\n   # On the server:\n   backprop ui            # no --share\n   # Then open http://localhost:7860 in your local browser.\n   ```\n   SSH provides the authentication layer the Reflex UI did not.\n3. **Audit existing deployments.** If any host running `backpropagate \u003e= 1.1.0` has previously been launched with `--share`, treat any uploaded training data, model paths, or HF push targets visible in that UI session as potentially exposed. Re-issue HF tokens that have been in use during such sessions.\n\n**Binary distribution gap.** Standalone binaries (Windows .exe / macOS .app via PyInstaller) failed to build for v1.2.0 and will land in a follow-up patch release. In the interim, users who relied on the v1.1.x binary distribution should install the patched version via `pip install backpropagate==1.2.0` to receive the auth-bypass fix. The v1.2.0 PyPI package and `@mcptoolshop/backpropagate@1.2.0` npm package both carry the patched code.\n\n## Credit\n\nDiscovered by the dogfood-swarm Stage A audit on 2026-05-22 (finding ID `FRONTEND-A-001`, classified CRITICAL). The audit also surfaced contradicting documentation in CHANGELOG / SHIP_GATE / README; those were corrected in v1.2.0 alongside the runtime fix.",
  "id": "PYSEC-2026-291",
  "modified": "2026-07-01T20:22:49.661886Z",
  "published": "2026-06-29T11:50:52.233310Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate/security/advisories/GHSA-f65r-h4g3-3h9h"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-48797"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate"
    },
    {
      "type": "WEB",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate/releases/tag/v1.2.0"
    },
    {
      "type": "PACKAGE",
      "url": "https://pypi.org/project/backpropagate"
    },
    {
      "type": "ADVISORY",
      "url": "https://github.com/advisories/GHSA-f65r-h4g3-3h9h"
    }
  ],
  "severity": [
    {
      "score": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
      "type": "CVSS_V4"
    }
  ],
  "summary": "Backpropagate: backprop ui --auth and backprop ui --share do not enforce authentication"
}

CVE-2026-48797 (GCVE-0-2026-48797)

Vulnerability from cvelistv5 – Published: 2026-06-16 23:35 – Updated: 2026-06-18 14:28

Title

Backpropagate: backprop ui --auth and backprop ui --share do not enforce authentication

Summary

Backpropagate is a Python library for fine-tuning large language models on a single GPU. In versions 1.1.0 and 1.1.1, the optional Reflex web UI exposes a training control plane without authentication: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push. The CLI accepts two operator-facing flags intended as security controls: --auth user:pass — documented as "require HTTP Basic authentication on every request to the UI." and--share — documented as "expose the UI on a public address; requires --auth." When --auth user:pass is passed, the CLI prints Auth: enabled (user: <username>) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend. The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port — local or remote, depending on whether --share is used — has full UI access. An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: "For Phase 1 the variable is exported but Reflex doesn't read it yet." This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced. An attacker who reaches the bound port can read uploaded datasets, trigger arbitrary training runs against any local base models as well as read their paths, trigger HuggingFace Hub pushes and cause disk-fill DoS. This issue has been fixed in version 1.2.0. If developers cannot immediately upgrade to 1.2.0 run backprop ui with no flags so it binds to localhost, use SSH port-forwarding (ssh -L 7860:localhost:7860 <training-host>) instead of --share for remote access, and audit any host previously launched with --share, re-issuing any HF tokens used during those sessions.

Severity

9.3 (Critical)


                        
                          CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

SSVC

Exploitation: none Automatable: no Technical Impact: total

CISA Coordinator · CISA-ADP (v2.0.3)

Decision recorded 2026-06-18 14:28 UTC

CWE

CWE-358 - Improperly Implemented Security Check for Standard
CWE-862 - Missing Authorization
CWE-1295 - Debug Messages Revealing Unnecessary Information

Assigner

GitHub_M mitre root Scorecard

References

2 references

URL	Tags
https://github.com/mcp-tool-shop-org/backpropagat…	x_refsource_CONFIRM
https://github.com/mcp-tool-shop-org/backpropagat…	x_refsource_MISC

Impacted products

2 products

Vendor	Product	Version
mcp-tool-shop-org	backpropagate	Affected: >= 1.1.0, < 1.2.0
mcp-tool-shop-org	@mcptoolshop/backpropagate	Affected: >= 1.1.0, < 1.2.0

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-48797",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-06-18T14:28:28.094901Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-06-18T14:28:42.997Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "backpropagate",
          "vendor": "mcp-tool-shop-org",
          "versions": [
            {
              "status": "affected",
              "version": "\u003e= 1.1.0, \u003c 1.2.0"
            }
          ]
        },
        {
          "product": "@mcptoolshop/backpropagate",
          "vendor": "mcp-tool-shop-org",
          "versions": [
            {
              "status": "affected",
              "version": "\u003e= 1.1.0, \u003c 1.2.0"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Backpropagate is a Python library for fine-tuning large language models on a single GPU. In versions 1.1.0 and 1.1.1, the optional Reflex web UI exposes a training control plane without authentication: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push. The CLI accepts two operator-facing flags intended as security controls: --auth user:pass \u2014 documented as \"require HTTP Basic authentication on every request to the UI.\" and--share \u2014 documented as \"expose the UI on a public address; requires --auth.\" When --auth user:pass is passed, the CLI prints Auth: enabled (user: \u003cusername\u003e) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend. The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port \u2014 local or remote, depending on whether --share is used \u2014 has full UI access. An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: \"For Phase 1 the variable is exported but Reflex doesn\u0027t read it yet.\" This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced. An attacker who reaches the bound port can read uploaded datasets, trigger arbitrary training runs against any local base models as well as read their paths, trigger HuggingFace Hub pushes and cause disk-fill DoS. This issue has been fixed in version 1.2.0. If developers cannot immediately upgrade to 1.2.0 run backprop ui with no flags so it binds to localhost, use SSH port-forwarding (ssh -L 7860:localhost:7860 \u003ctraining-host\u003e) instead of --share for remote access, and audit any host previously launched with --share, re-issuing any HF tokens used during those sessions."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 9.3,
            "baseSeverity": "CRITICAL",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "HIGH",
            "vulnIntegrityImpact": "HIGH"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-358",
              "description": "CWE-358: Improperly Implemented Security Check for Standard",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-862",
              "description": "CWE-862: Missing Authorization",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-1295",
              "description": "CWE-1295: Debug Messages Revealing Unnecessary Information",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-06-16T23:43:44.836Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/mcp-tool-shop-org/backpropagate/security/advisories/GHSA-f65r-h4g3-3h9h",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/mcp-tool-shop-org/backpropagate/security/advisories/GHSA-f65r-h4g3-3h9h"
        },
        {
          "name": "https://github.com/mcp-tool-shop-org/backpropagate/releases/tag/v1.2.0",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/mcp-tool-shop-org/backpropagate/releases/tag/v1.2.0"
        }
      ],
      "source": {
        "advisory": "GHSA-f65r-h4g3-3h9h",
        "discovery": "UNKNOWN"
      },
      "title": "Backpropagate: backprop ui --auth and backprop ui --share do not enforce authentication"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-48797",
    "datePublished": "2026-06-16T23:35:22.373Z",
    "dateReserved": "2026-05-22T20:18:20.366Z",
    "dateUpdated": "2026-06-18T14:28:42.997Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

GHSA-F65R-H4G3-3H9H

Vulnerability from github – Published: 2026-06-26 20:34 – Updated: 2026-06-26 20:34

Summary

Backpropagate: backprop ui --auth and backprop ui --share do not enforce authentication

Details

Summary

The CLI accepts two operator-facing flags intended as security controls:

--auth user:pass — documented as "require HTTP Basic authentication on every request to the UI."
--share — documented as "expose the UI on a public address; requires --auth."

Impact

An attacker who reaches the bound port can:

Read uploaded datasets rendered in the UI preview, including content of any JSONL/CSV/TXT file the legitimate operator has uploaded for fine-tuning.
Trigger arbitrary training runs against any base model the operator has installed locally or that can be downloaded from HuggingFace.
Trigger HuggingFace Hub pushes to repositories named via the UI input (subject to the operator's local HF token's scope — typically all repos owned by the operator).
Cause disk-fill DoS via the rx.upload endpoint (no size cap, no extension filter, no per-session count cap in v1.1.0 / v1.1.1).
Read model paths (source_model_path, dataset_path, model, uploaded_path) which are user-supplied and bypass the safe_path() helper that lives in backpropagate/ui_security.py (path validation is dead code on the Reflex surface in v1.1.0 / v1.1.1).

Patches

Upgrade with:

pip: pip install --upgrade backpropagate
npm: npm install -g @mcptoolshop/backpropagate@latest

Full release notes: https://github.com/mcp-tool-shop-org/backpropagate/blob/main/CHANGELOG.md#120---2026-05-23

Workarounds

If users cannot upgrade immediately:

Do not pass --auth or --share to backprop ui. Run the UI with no flags (backprop ui); it will bind to localhost and accept any client that can reach 127.0.0.1.
For remote access, use SSH port-forwarding instead of --share: # On the client: ssh -L 7860:localhost:7860 <training-host> # On the server: backprop ui # no --share # Then open http://localhost:7860 in your local browser. SSH provides the authentication layer the Reflex UI did not.
Audit existing deployments. If any host running backpropagate >= 1.1.0 has previously been launched with --share, treat any uploaded training data, model paths, or HF push targets visible in that UI session as potentially exposed. Re-issue HF tokens that have been in use during such sessions.

Credit

Severity

9.3 (Critical)


                  
                    CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Show details on source website

JSON

To clipboard

{
  "affected": [
    {
      "package": {
        "ecosystem": "PyPI",
        "name": "backpropagate"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "1.1.0"
            },
            {
              "fixed": "1.2.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "@mcptoolshop/backpropagate"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "1.1.0"
            },
            {
              "fixed": "1.2.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2026-48797"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-1295",
      "CWE-358",
      "CWE-862"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2026-06-26T20:34:29Z",
    "nvd_published_at": "2026-06-17T13:20:43Z",
    "severity": "CRITICAL"
  },
  "details": "## Summary\n\nIn `backpropagate \u003e= 1.1.0`, the optional Reflex web UI (`pip install backpropagate[ui]`, launched via `backprop ui`) exposes a training control plane: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push.\n\nThe CLI accepts two operator-facing flags intended as security controls:\n\n- `--auth user:pass` \u2014 documented as \"require HTTP Basic authentication on every request to the UI.\"\n- `--share` \u2014 documented as \"expose the UI on a public address; requires `--auth`.\"\n\nWhen `--auth user:pass` is passed, the CLI prints `Auth: enabled (user: \u003cusername\u003e)` to confirm to the operator that authentication is active, then exports `BACKPROPAGATE_UI_AUTH=user:pass` to the subprocess that launches the Reflex backend.\n\n**The Reflex backend (`backpropagate/ui_app/**`) never reads `BACKPROPAGATE_UI_AUTH`.** No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port \u2014 local or remote, depending on whether `--share` is used \u2014 has full UI access.\n\nAn inline comment at `backpropagate/cli.py:1217-1218` in the v1.1.0 source documents the gap: *\"For Phase 1 the variable is exported but Reflex doesn\u0027t read it yet.\"* This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced.\n\nThis advisory is filed primarily because the runtime contradicted an operator-facing security claim. Code-only bugs of comparable shape (auth check missing entirely from a path) would already warrant disclosure; the additional false-promise dimension raises the severity.\n\n## Impact\n\nAn attacker who reaches the bound port can:\n\n- **Read uploaded datasets** rendered in the UI preview, including content of any JSONL/CSV/TXT file the legitimate operator has uploaded for fine-tuning.\n- **Trigger arbitrary training runs** against any base model the operator has installed locally or that can be downloaded from HuggingFace.\n- **Trigger HuggingFace Hub pushes** to repositories named via the UI input (subject to the operator\u0027s local HF token\u0027s scope \u2014 typically all repos owned by the operator).\n- **Cause disk-fill DoS** via the `rx.upload` endpoint (no size cap, no extension filter, no per-session count cap in v1.1.0 / v1.1.1).\n- **Read model paths** (`source_model_path`, `dataset_path`, `model`, `uploaded_path`) which are user-supplied and bypass the `safe_path()` helper that lives in `backpropagate/ui_security.py` (path validation is dead code on the Reflex surface in v1.1.0 / v1.1.1).\n\nThe combination of unauthenticated training control, HF push target spoofing, and path-input traversal makes the affected endpoint suitable for both data exfiltration (reading uploaded training data) and supply-chain attacks (pushing tampered model weights to the operator\u0027s HF account).\n\nThe local-only default (no `--share`) reduces exposure to a host-local attacker. The `--share` flag is documented as a \"public URL\" feature; operators who used `--share --auth user:pass` had no warning that the auth half was inert.\n\n## Patches\n\nFixed in **v1.2.0** (released 2026-05-23). The patch implements real ASGI middleware via `rx.App(api_transformer=basic_auth_transformer)` that gates HTTP routes AND the `/_event` WebSocket upgrade. Four modes (`no_auth_local_only` / `token_auto` / `explicit_creds` / `production`), HMAC-signed cookie validated PRE-`websocket.accept()`, Host + Origin allowlists. The middleware ships alongside a 4-layer defense in depth at the cli.py / ui_app/app.py / rxconfig.py / env-strip surfaces so direct `python -m reflex run` invocations (bypassing the CLI guard) also enforce authentication.\n\nUpgrade with:\n\n- pip: `pip install --upgrade backpropagate`\n- npm: `npm install -g @mcptoolshop/backpropagate@latest`\n\nFull release notes: https://github.com/mcp-tool-shop-org/backpropagate/blob/main/CHANGELOG.md#120---2026-05-23\n\n## Workarounds\n\nIf users cannot upgrade immediately:\n\n1. **Do not pass `--auth` or `--share` to `backprop ui`.** Run the UI with no flags (`backprop ui`); it will bind to `localhost` and accept any client that can reach `127.0.0.1`.\n2. **For remote access, use SSH port-forwarding** instead of `--share`:\n   ```\n   # On the client:\n   ssh -L 7860:localhost:7860 \u003ctraining-host\u003e\n   # On the server:\n   backprop ui            # no --share\n   # Then open http://localhost:7860 in your local browser.\n   ```\n   SSH provides the authentication layer the Reflex UI did not.\n3. **Audit existing deployments.** If any host running `backpropagate \u003e= 1.1.0` has previously been launched with `--share`, treat any uploaded training data, model paths, or HF push targets visible in that UI session as potentially exposed. Re-issue HF tokens that have been in use during such sessions.\n\n**Binary distribution gap.** Standalone binaries (Windows .exe / macOS .app via PyInstaller) failed to build for v1.2.0 and will land in a follow-up patch release. In the interim, users who relied on the v1.1.x binary distribution should install the patched version via `pip install backpropagate==1.2.0` to receive the auth-bypass fix. The v1.2.0 PyPI package and `@mcptoolshop/backpropagate@1.2.0` npm package both carry the patched code.\n\n## Credit\n\nDiscovered by the dogfood-swarm Stage A audit on 2026-05-22 (finding ID `FRONTEND-A-001`, classified CRITICAL). The audit also surfaced contradicting documentation in CHANGELOG / SHIP_GATE / README; those were corrected in v1.2.0 alongside the runtime fix.",
  "id": "GHSA-f65r-h4g3-3h9h",
  "modified": "2026-06-26T20:34:29Z",
  "published": "2026-06-26T20:34:29Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate/security/advisories/GHSA-f65r-h4g3-3h9h"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-48797"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate"
    },
    {
      "type": "WEB",
      "url": "https://github.com/mcp-tool-shop-org/backpropagate/releases/tag/v1.2.0"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
      "type": "CVSS_V4"
    }
  ],
  "summary": "Backpropagate: backprop ui --auth and backprop ui --share do not enforce authentication"
}

Sightings

Author	Source	Type	Date	Other

Nomenclature

Seen: The vulnerability was mentioned, discussed, or observed by the user.
Confirmed: The vulnerability has been validated from an analyst's perspective.
Published Proof of Concept: A public proof of concept is available for this vulnerability.
Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
Not confirmed: The user expressed doubt about the validity of the vulnerability.
Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base model, served locally by ML-Gateway. They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.

Action not permitted

PYSEC-2026-291

Summary

Impact

Patches

Workarounds

Credit

CVE-2026-48797 (GCVE-0-2026-48797)

GHSA-F65R-H4G3-3H9H

Summary

Impact

Patches

Workarounds

Credit

Tags

Sightings

Nomenclature

Related by attack behaviour