FKIE_CVE-2026-98797
Vulnerability from fkie_nvd - Published: 2026-10-18 16:17 - Updated: 2026-10-19 10:19
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
net: cap skb->queue_mapping when the tx queue is picked
skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue
flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit()
cleared the flag before sch_handle_egress() and only read it afterwards,
so the flag was not confined to the xmit that set it: a nested xmit
(mirred redirect or mirror, or a drop after skbedit) could set the flag
and the outer xmit would consume it for an skb that never went through
skbedit.
A forwarded packet still carries the ingress NIC's rx_queue + 1 in
skb->queue_mapping, so the outer device then indexes its tx queue state
with that stale value. Taprio's child array q->qdiscs[] is sized to the
device's queue count, so taprio_enqueue() indexes past its allocation
and dereferences the result as a struct Qdisc *.
We (ab)use the skb->nf_skip_egress which means "skip netfilter egress
for this packet" to tag to "am I in tc egress?". Despite the overload
I dont see it as a conflict since the marker is set only around the
single sch_handle_egress() call and ingress path is guarded by
tc_at_ingress.
I will send a followup(net-next) patch once this hits net-next to
rename the skb->nf_skip_egress bit/flag to skb->skip_egress
Arm the flag only from the egress classifier that can use it: raise
skip_txqueue from tcf_skbedit_act() only when it runs inside
sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc
classifier runs in q->enqueue(), after the tx queue has been picked,
so a mapping it sets cannot affect the current packet; arming the flag
there only pollutes it for a later xmit. Then own the flag for the xmit
frame the egress hook runs in: save the incoming value and clear it just
before sch_handle_egress(), and restore it after the hook - on the
consumed (drop) path, or, in the same call that reads it, on the
surviving path. The save and the restores stay inside the
egress_needed_key static branch, so a packet pays for them only when
egress hooks are active (2f1e85b1aee4).
Store the value netdev_cap_txqueue() selected back into skb->queue_mapping
in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so
the skip_txqueue path never hands a later reader on the xmit path a
mapping the device cannot serve. A store made still later in the same
frame, by a tc BPF program attached to a transmit qdisc, is outside this
path and is not re-capped; a separate followup will resolve that path.
netdev_xmit_skip_txqueue() returns the previous flag value so the
save-and-clear is one call, and a no-op stub is provided when
CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under
CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so
skb_at_tc_egress() is valid whenever the egress path is built.
A local user in a network namespace can redirect a packet from a device
with more TX queues to one with fewer after setting a mapping valid only
on the larger device. That reaches these reads and, under KASAN, faults
with "slab-out-of-bounds in taprio_enqueue".
Conditions to recreate the bug: the report's own trigger is a local user
with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed.
With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y,
CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y,
CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb
(2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb
(num_tc 1, queues 2@0) and clsact on all three; then add an egress
matchall filter on every device. On qa: "action skbedit queue_mapping 2
pipe action mirred egress redirect dev qb". On qb: "action mirred egress
mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one
packet out qa. qc's skbedit sets the flag while qb's outer xmit is in
flight; without the fix qb consumes it and reads its two-entry taprio
child array with the forwarded packet's stale mapping. A qc whose
skb
---truncated---
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"include/linux/netfilter_netdev.h",
"include/linux/rtnetlink.h",
"include/linux/skbuff.h",
"include/net/sch_generic.h",
"net/core/dev.c",
"net/sched/act_skbedit.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "c6ec35c8267c84c2094cb485db20c06384fc2bcc",
"status": "affected",
"version": "2f1e85b1aee459b7d0fd981839042c6a38ffaf0c",
"versionType": "git"
},
{
"lessThan": "2f581814e4e3ea6a5e98f49813dc4c68444a0c4a",
"status": "affected",
"version": "2f1e85b1aee459b7d0fd981839042c6a38ffaf0c",
"versionType": "git"
},
{
"lessThan": "f99de42f5c6f8d088063817dad82c3334e87c570",
"status": "affected",
"version": "2f1e85b1aee459b7d0fd981839042c6a38ffaf0c",
"versionType": "git"
},
{
"lessThan": "ea4d4b5dddb5121e64f56fd8e0720bd8b447b63d",
"status": "affected",
"version": "2f1e85b1aee459b7d0fd981839042c6a38ffaf0c",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"include/linux/netfilter_netdev.h",
"include/linux/rtnetlink.h",
"include/linux/skbuff.h",
"include/net/sch_generic.h",
"net/core/dev.c",
"net/sched/act_skbedit.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.19"
},
{
"lessThan": "5.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.113",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.56",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: cap skb-\u003equeue_mapping when the tx queue is picked\n\nskbedit can set skb-\u003equeue_mapping and raise the per-CPU skip_txqueue\nflag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit()\ncleared the flag before sch_handle_egress() and only read it afterwards,\nso the flag was not confined to the xmit that set it: a nested xmit\n(mirred redirect or mirror, or a drop after skbedit) could set the flag\nand the outer xmit would consume it for an skb that never went through\nskbedit.\n\nA forwarded packet still carries the ingress NIC\u0027s rx_queue + 1 in\nskb-\u003equeue_mapping, so the outer device then indexes its tx queue state\nwith that stale value. Taprio\u0027s child array q-\u003eqdiscs[] is sized to the\ndevice\u0027s queue count, so taprio_enqueue() indexes past its allocation\nand dereferences the result as a struct Qdisc *.\n\nWe (ab)use the skb-\u003enf_skip_egress which means \"skip netfilter egress\nfor this packet\" to tag to \"am I in tc egress?\". Despite the overload\nI dont see it as a conflict since the marker is set only around the\nsingle sch_handle_egress() call and ingress path is guarded by\ntc_at_ingress.\nI will send a followup(net-next) patch once this hits net-next to\nrename the skb-\u003enf_skip_egress bit/flag to skb-\u003eskip_egress\n\nArm the flag only from the egress classifier that can use it: raise\nskip_txqueue from tcf_skbedit_act() only when it runs inside\nsch_handle_egress(), thanks to skb-\u003enf_skip_egress. An egress qdisc\nclassifier runs in q-\u003eenqueue(), after the tx queue has been picked,\nso a mapping it sets cannot affect the current packet; arming the flag\nthere only pollutes it for a later xmit. Then own the flag for the xmit\nframe the egress hook runs in: save the incoming value and clear it just\nbefore sch_handle_egress(), and restore it after the hook - on the\nconsumed (drop) path, or, in the same call that reads it, on the\nsurviving path. The save and the restores stay inside the\negress_needed_key static branch, so a packet pays for them only when\negress hooks are active (2f1e85b1aee4).\n\nStore the value netdev_cap_txqueue() selected back into skb-\u003equeue_mapping\nin netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so\nthe skip_txqueue path never hands a later reader on the xmit path a\nmapping the device cannot serve. A store made still later in the same\nframe, by a tc BPF program attached to a transmit qdisc, is outside this\npath and is not re-capped; a separate followup will resolve that path.\n\nnetdev_xmit_skip_txqueue() returns the previous flag value so the\nsave-and-clear is one call, and a no-op stub is provided when\nCONFIG_NET_EGRESS is disabled. skb-\u003enf_skip_egress is compiled under\nCONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so\nskb_at_tc_egress() is valid whenever the egress path is built.\n\nA local user in a network namespace can redirect a packet from a device\nwith more TX queues to one with fewer after setting a mapping valid only\non the larger device. That reaches these reads and, under KASAN, faults\nwith \"slab-out-of-bounds in taprio_enqueue\".\n\nConditions to recreate the bug: the report\u0027s own trigger is a local user\nwith CAP_NET_ADMIN in a network namespace, so no eBPF program is needed.\nWith CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y,\nCONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y,\nCONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb\n(2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb\n(num_tc 1, queues 2@0) and clsact on all three; then add an egress\nmatchall filter on every device. On qa: \"action skbedit queue_mapping 2\npipe action mirred egress redirect dev qb\". On qb: \"action mirred egress\nmirror dev qc\". On qc: \"action skbedit queue_mapping 0 pipe\". Send one\npacket out qa. qc\u0027s skbedit sets the flag while qb\u0027s outer xmit is in\nflight; without the fix qb consumes it and reads its two-entry taprio\nchild array with the forwarded packet\u0027s stale mapping. A qc whose\nskb\n---truncated---"
}
],
"id": "CVE-2026-98797",
"lastModified": "2026-10-19T10:19:43.707",
"metrics": {},
"published": "2026-10-18T16:17:33.673",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/2f581814e4e3ea6a5e98f49813dc4c68444a0c4a"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/c6ec35c8267c84c2094cb485db20c06384fc2bcc"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/ea4d4b5dddb5121e64f56fd8e0720bd8b447b63d"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/f99de42f5c6f8d088063817dad82c3334e87c570"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…