FKIE_CVE-2026-98479
Vulnerability from fkie_nvd - Published: 2026-10-18 16:16 - Updated: 2026-10-24 14:16
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write, and page cache pages for a buffered one.
Observed against a test target that emits one 512-byte Data-In naming a 128
KB write's ITT, after the R2T for that write. With O_DIRECT the caller's
buffer ends up holding 512 bytes of the target's data while pwrite()
returns 131072. Buffered is quieter: pwrite() and fsync() both succeed,
nothing is logged, and reading those blocks back returns the target's bytes
out of the page cache without a command going on the wire.
Check the direction before using the scatterlist, the way the R2T path
already does.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/scsi/libiscsi_tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "79991b770fc3685b1d5cf805b659a879edd19931",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "8db1232945bc663fb94f300090a1fc108de99296",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "94e5bdd08e51c450d954bc592f591c233ca5c9df",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "de96dc11aee0d058927bff94a168e3c5c46483e2",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "e3b25bf2cf2496e85bc05b33360faf9fdf880e03",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "ee56b5e18f566c0b5a183379dcd63d402cebf2f8",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "24ffc919467d20951f0f132d1c75294e2e91e09b",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
},
{
"lessThan": "bce07e2f37b5e4a427d36fd6b1c14067b27591db",
"status": "affected",
"version": "a081c13e39b5c17052a7b46fafa61019c4c110ff",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/scsi/libiscsi_tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.29"
},
{
"lessThan": "2.6.29",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.271",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.222",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.189",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.158",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.112",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.55",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.9",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: libiscsi_tcp: Check the data direction of a Data-In PDU\n\nThe Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task\nand copies the PDU\u0027s data segment into that command\u0027s scatterlist without\nasking whether the command was reading. iscsi_tcp_r2t_rsp() in the same\nfile does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.\n\nA target that answers a WRITE command\u0027s ITT with a Data-In therefore has\nthe initiator write target-supplied bytes into the pages that write was\nabout to send. Those are the caller\u0027s own pinned pages for an O_DIRECT\nwrite, and page cache pages for a buffered one.\n\nObserved against a test target that emits one 512-byte Data-In naming a 128\nKB write\u0027s ITT, after the R2T for that write. With O_DIRECT the caller\u0027s\nbuffer ends up holding 512 bytes of the target\u0027s data while pwrite()\nreturns 131072. Buffered is quieter: pwrite() and fsync() both succeed,\nnothing is logged, and reading those blocks back returns the target\u0027s bytes\nout of the page cache without a command going on the wire.\n\nCheck the direction before using the scatterlist, the way the R2T path\nalready does."
}
],
"id": "CVE-2026-98479",
"lastModified": "2026-10-24T14:16:43.610",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 3.6,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
]
},
"published": "2026-10-18T16:16:58.467",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/24ffc919467d20951f0f132d1c75294e2e91e09b"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/79991b770fc3685b1d5cf805b659a879edd19931"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/8db1232945bc663fb94f300090a1fc108de99296"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/94e5bdd08e51c450d954bc592f591c233ca5c9df"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/bce07e2f37b5e4a427d36fd6b1c14067b27591db"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/de96dc11aee0d058927bff94a168e3c5c46483e2"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/e3b25bf2cf2496e85bc05b33360faf9fdf880e03"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/ee56b5e18f566c0b5a183379dcd63d402cebf2f8"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…