FKIE_CVE-2026-81039

Vulnerability from fkie_nvd - Published: 2026-10-26 17:17 - Updated: 2026-11-04 05:19
Summary
The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution. The undirected set's own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() — the only path that returns a reservation to the pool — is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected.
Impacted products
Vendor Product Version

{
  "affected": [
    {
      "affectedData": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/bluetooth/host/adv.c",
            "subsys/bluetooth/host/hci_core.c",
            "subsys/bluetooth/host/hci_core.h"
          ],
          "programRoutines": [
            {
              "name": "bt_hci_le_adv_set_terminated"
            },
            {
              "name": "bt_hci_le_enh_conn_complete"
            },
            {
              "name": "find_pending_connect"
            }
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.3.2",
              "status": "affected",
              "version": "2.3.0",
              "versionType": "semver"
            },
            {
              "lessThan": "4.5.0",
              "status": "affected",
              "version": "4.4.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "source": "vulnerabilities@zephyrproject.org"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "The Bluetooth host pre-allocates a bt_conn object (a \"reservation\") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET \u003e 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set.\n\nThe defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity \u2014 one undirected and one directed at a peer P (the common \"directed reconnect to a bonded central while still accepting new centrals\" pattern) \u2014 a remote initiator whose address maps to P connecting on the undirected set causes the directed set\u0027s reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution.\n\nThe undirected set\u0027s own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() \u2014 the only path that returns a reservation to the pool \u2014 is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected."
    }
  ],
  "id": "CVE-2026-81039",
  "lastModified": "2026-11-04T05:19:03.763",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "ADJACENT_NETWORK",
          "availabilityImpact": "LOW",
          "baseScore": 4.3,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
          "version": "3.1"
        },
        "exploitabilityScore": 2.8,
        "impactScore": 1.4,
        "source": "vulnerabilities@zephyrproject.org",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-81039",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2026-10-26T16:59:21.234445Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2026-10-26T17:17:30.487",
  "references": [
    {
      "source": "vulnerabilities@zephyrproject.org",
      "url": "https://github.com/zephyrproject-rtos/zephyr/commit/b6a5e6e8aa9072a10a52420095af2d99f04d71fc"
    },
    {
      "source": "vulnerabilities@zephyrproject.org",
      "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5jw9-rp59-ch2q"
    }
  ],
  "sourceIdentifier": "vulnerabilities@zephyrproject.org",
  "vulnStatus": "Awaiting Analysis",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-772"
        }
      ],
      "source": "vulnerabilities@zephyrproject.org",
      "type": "Secondary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…