FKIE_CVE-2026-75806
Vulnerability from fkie_nvd - Published: 2026-09-29 16:17 - Updated: 2026-11-10 13:19
Severity
Summary
Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary.
References
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "4.0.3",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "3.6.5",
"status": "affected",
"version": "3.6.0",
"versionType": "semver"
},
{
"lessThan": "3.5.9",
"status": "affected",
"version": "3.5.0",
"versionType": "semver"
},
{
"lessThan": "3.4.8",
"status": "affected",
"version": "3.4.0",
"versionType": "semver"
},
{
"lessThan": "3.0.23",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1zj",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
}
]
}
],
"source": "openssl-security@openssl.org"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "AB24C69B-F66B-4BC6-99E8-4D3088607B00",
"versionEndExcluding": "1.1.1zj",
"versionStartIncluding": "1.1.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C9AFA409-BE77-40FB-8191-3405AC8F52C0",
"versionEndExcluding": "3.0.23",
"versionStartIncluding": "3.0.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "707E1EC7-0538-4F9F-96CB-C89FECC1F3ED",
"versionEndExcluding": "3.4.8",
"versionStartIncluding": "3.4.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B822E02B-8728-4C34-98BC-52D0A0A735B3",
"versionEndExcluding": "3.5.9",
"versionStartIncluding": "3.5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "96C892B6-618B-4CB9-85B6-76C641D17532",
"versionEndExcluding": "3.6.5",
"versionStartIncluding": "3.6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BC4A99CC-483D-4C81-A95F-6AEB2BF1B500",
"versionEndExcluding": "4.0.3",
"versionStartIncluding": "4.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: An established DTLS 1.2 association using an AEAD cipher suite\ncan be terminated by a single unauthenticated datagram whose encrypted\nfragment is shorter than the mandatory explicit IV and authentication tag\noverhead.\n\nImpact summary: An attacker who can send a datagram that is routed to an\nexisting DTLS 1.2 association can tear that association down without knowing\nany key material. This is a Denial of Service limited to the targeted\nassociation. There is no memory safety or confidentiality impact.\n\nCWE: CWE-1284: Improper Validation of Specified Quantity in Input\n\nDescription: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher\nsuite carries an explicit IV followed by the ciphertext and an authentication\ntag. When decrypting such a record the record layer passed the record length to\nthe cipher implementation before checking that the record was long enough to\ncontain the explicit IV and the tag. For a record shorter than that overhead the\ncipher implementation rejected the impossible length, and the record layer\ntreated this as an internal failure and raised a fatal internal_error alert\ninstead of treating the record as one that failed authentication.\n\nIn TLS 1.2 the same record causes a fatal internal_error alert instead of the\nexpected bad_record_mac alert. Since any undecryptable record already\nterminates a TLS connection, this is a protocol conformance issue rather than\na security issue in TLS.\n\nThe fix validates the record length against the explicit IV and tag length\nbefore any AEAD processing, so that TLS reports bad_record_mac and DTLS\nsilently discards the record.\n\nFIPS impact: no\nThe affected code is outside the FIPS module boundary."
}
],
"id": "CVE-2026-75806",
"lastModified": "2026-11-10T13:19:39.453",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 1.4,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-75806",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-29T16:52:47.298458Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-09-29T16:17:11.217",
"references": [
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/04728a289a823e68137f88da016cb9ede307217d"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/050b275cd671a6eed1d6457642d41a5a77aab972"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/3a4589d015a9049d47b66f186cf50a8711343a1d"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/5af82fefbaf2b5fec2fc0e1d87f112844902f01d"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Vendor Advisory"
],
"url": "https://openssl-library.org/news/secadv/20260929.txt"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-1284"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…