CVE-2026-93668 (GCVE-0-2026-93668)
Vulnerability from cvelistv5 – Published: 2026-11-16 21:19 – Updated: 2026-11-16 21:19
VLAI
EPSS
VEX
Title
Bluetooth BR/EDR SDP server blocks the Bluetooth workqueue indefinitely when the SDP buffer pool is empty
Summary
The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound.
The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation.
A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved.
The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback.
Severity
6.5 (Medium)
CWE
- CWE-833 - dos
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| zephyrproject | zephyr |
Affected:
1.6.0 , < 4.5.0
(semver)
|
{
"containers": {
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/bluetooth/host/classic/sdp.c",
"subsys/bluetooth/host/sdp.c"
],
"programRoutines": [
{
"name": "bt_sdp_create_pdu"
},
{
"name": "bt_sdp_recv"
},
{
"name": "sdp_svc_att_req"
},
{
"name": "sdp_svc_search_att_req"
},
{
"name": "sdp_svc_search_req"
},
{
"name": "send_err_rsp"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "1.6.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound.\n\nThe allocation is reached from bt_sdp_recv() on the Bluetooth host\u0027s RX context: the bt_workq \"BT RX WQ\" workqueue in the default configuration since v3.1.0, and the dedicated \"BT RX\" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation.\n\nA pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller\u0027s buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved.\n\nThe fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp-\u003erecv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-833",
"description": "dos",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-16T21:19:15.869Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/54f07618dc86445d6e76cedb471688305f330e25"
},
{
"name": "GHSA-769h-ph6c-2xf5",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-769h-ph6c-2xf5"
}
],
"title": "Bluetooth BR/EDR SDP server blocks the Bluetooth workqueue indefinitely when the SDP buffer pool is empty",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-93668",
"datePublished": "2026-11-16T21:19:15.869Z",
"dateReserved": "2026-09-18T13:48:52.253Z",
"dateUpdated": "2026-11-16T21:19:15.869Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/bluetooth/host/classic/sdp.c",
"subsys/bluetooth/host/sdp.c"
],
"programRoutines": [
{
"name": "bt_sdp_create_pdu"
},
{
"name": "bt_sdp_recv"
},
{
"name": "sdp_svc_att_req"
},
{
"name": "sdp_svc_search_att_req"
},
{
"name": "sdp_svc_search_req"
},
{
"name": "send_err_rsp"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "1.6.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound.\n\nThe allocation is reached from bt_sdp_recv() on the Bluetooth host\u0027s RX context: the bt_workq \"BT RX WQ\" workqueue in the default configuration since v3.1.0, and the dedicated \"BT RX\" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation.\n\nA pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller\u0027s buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved.\n\nThe fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp-\u003erecv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback."
}
],
"id": "CVE-2026-93668",
"lastModified": "2026-11-16T22:18:26.530",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 3.6,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
},
"published": "2026-11-16T22:18:26.390",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/54f07618dc86445d6e76cedb471688305f330e25"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-769h-ph6c-2xf5"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-833"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…