CVE-2026-64277 (GCVE-0-2026-64277)
Vulnerability from cvelistv5 – Published: 2026-07-25 08:49 – Updated: 2026-10-19 20:28
VLAI
EPSS
VEX
Title
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Summary
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting.
Severity
7.8 (High)
SSVC
Exploitation: none
Automatable: no
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-16 15:38 UTC
CWE
- CWE-787 - Out-of-bounds Write
Assigner
References
8 references
Impacted products
2 products
| Vendor | Product | Version | |
|---|---|---|---|
| Linux | Linux |
Affected:
9e4c596bfd004f447a652205163234dfd4aafa69 , < 502ad7caaa1a445b734c827fa256e5311df67e3d
(git)
Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 3480e24bc4e178aaa009edb25b6ee12df199e210 (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 35ed74d32d8260bdfb14a94caf402bf0866bdeec (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < ba57f430328534501962d60d651e385ffd7af9ca (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 850117b637bcb1dcc14be0cf09ac819a8707b42c (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 8db211aed83733073b0814adaeeab61d4521474e (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42 (git) Affected: 9e4c596bfd004f447a652205163234dfd4aafa69 , < 57c10915f2c16c90e0d46ad00876bf39ece40fc2 (git) |
|
| Linux | Linux |
Affected:
5.10
Unaffected: 0 , < 5.10 (semver) Unaffected: 5.10.261 , ≤ 5.10.* (semver) Unaffected: 5.15.212 , ≤ 5.15.* (semver) Unaffected: 6.1.178 , ≤ 6.1.* (semver) Unaffected: 6.6.145 , ≤ 6.6.* (semver) Unaffected: 6.12.96 , ≤ 6.12.* (semver) Unaffected: 6.18.39 , ≤ 6.18.* (semver) Unaffected: 7.1.4 , ≤ 7.1.* (semver) Unaffected: 7.2 , ≤ * (original_commit_for_fix) |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-64277",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:38:13.158819Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-787",
"description": "CWE-787 Out-of-bounds Write",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-19T20:28:17.252Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "502ad7caaa1a445b734c827fa256e5311df67e3d",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "3480e24bc4e178aaa009edb25b6ee12df199e210",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "35ed74d32d8260bdfb14a94caf402bf0866bdeec",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "ba57f430328534501962d60d651e385ffd7af9ca",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "850117b637bcb1dcc14be0cf09ac819a8707b42c",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "8db211aed83733073b0814adaeeab61d4521474e",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "57c10915f2c16c90e0d46ad00876bf39ece40fc2",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.10"
},
{
"lessThan": "5.10",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.96",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.39",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.145",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.96",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.39",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1.4",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2",
"versionStartIncluding": "5.10",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nInput: synaptics-rmi4 - bound the F3A keymap to the GPIO count\n\nrmi_f3a_initialize() takes the GPIO count from the device query register\n(f3a-\u003egpio_count = buf \u0026 RMI_F3A_GPIO_COUNT, range 0..127).\nrmi_f3a_map_gpios() then allocates gpio_key_map with\nmin(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but\nrmi_f3a_attention() iterates the full gpio_count and dereferences\ngpio_key_map[i], and input-\u003ekeycodemax is set to the full gpio_count\nwhile input-\u003ekeycode points at the 6-entry allocation.\n\nA device that reports gpio_count \u003e 6 therefore causes an out-of-bounds\nread of gpio_key_map[] on every attention interrupt, and out-of-bounds\naccesses through the input core\u0027s default keymap ioctls: EVIOCGKEYCODE\nreads past the buffer (leaking adjacent slab memory to user space) and\nEVIOCSKEYCODE writes a caller-controlled value past it, for any process\nable to open the evdev node, since input_default_getkeycode() and\ninput_default_setkeycode() only bound the index against keycodemax.\n\nSize the keymap for the full gpio_count. The mapping loop is unchanged:\nit still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)\nentries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)\nand are skipped when reporting."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The highest-severity defensible path is local: a process that can open the affected RMI touchpad\u0027s evdev node can invoke the vulnerable keymap ioctls. A malicious USB RMI device is also a physical trigger, but the local ioctl path is more severe.\nAC:L - On a vulnerable device reporting more than six GPIOs, selecting any keymap index from 6 through gpio_count-1 deterministically accesses beyond the allocation. No race or condition outside the attacker\u0027s control is required.\nPR:L - The evdev keymap ioctl path has no capability or authentication check; only ordinary device-node access controls apply. An unprivileged user with seat, ACL, or input-device access can exploit it without administrative capabilities.\nUI:N - The attacker directly issues EVIOCGKEYCODE or EVIOCSKEYCODE after opening the node. No action by another user is required.\nS:U - Exploitation compromises the host kernel within the same security authority. It does not inherently cross a VM, IOMMU, or other separate security boundary.\nC:H - EVIOCGKEYCODE can disclose successive 16-bit words across as much as 242 bytes beyond the six-entry keymap, exposing adjacent slab contents and potentially kernel pointers. The accompanying corruption can also support stronger disclosure primitives.\nI:H - EVIOCSKEYCODE provides indexed, caller-controlled 16-bit writes throughout the out-of-bounds range. This heap corruption can overwrite adjacent pointers or control data and plausibly enable kernel code execution.\nA:H - The controlled heap overwrite can corrupt adjacent slab objects and cause a kernel oops or panic, while device attention interrupts repeatedly exercise the out-of-bounds read. The failure can be triggered repeatedly without victim interaction."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-17T04:52:32.147Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/502ad7caaa1a445b734c827fa256e5311df67e3d"
},
{
"url": "https://git.kernel.org/stable/c/3480e24bc4e178aaa009edb25b6ee12df199e210"
},
{
"url": "https://git.kernel.org/stable/c/35ed74d32d8260bdfb14a94caf402bf0866bdeec"
},
{
"url": "https://git.kernel.org/stable/c/ba57f430328534501962d60d651e385ffd7af9ca"
},
{
"url": "https://git.kernel.org/stable/c/850117b637bcb1dcc14be0cf09ac819a8707b42c"
},
{
"url": "https://git.kernel.org/stable/c/8db211aed83733073b0814adaeeab61d4521474e"
},
{
"url": "https://git.kernel.org/stable/c/64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42"
},
{
"url": "https://git.kernel.org/stable/c/57c10915f2c16c90e0d46ad00876bf39ece40fc2"
}
],
"title": "Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-64277",
"datePublished": "2026-07-25T08:49:21.936Z",
"dateReserved": "2026-07-19T15:36:31.776Z",
"dateUpdated": "2026-10-19T20:28:17.252Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-64277",
"date": "2026-11-16",
"epss": "0.00169",
"percentile": "0.06341"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "502ad7caaa1a445b734c827fa256e5311df67e3d",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "3480e24bc4e178aaa009edb25b6ee12df199e210",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "35ed74d32d8260bdfb14a94caf402bf0866bdeec",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "ba57f430328534501962d60d651e385ffd7af9ca",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "850117b637bcb1dcc14be0cf09ac819a8707b42c",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "8db211aed83733073b0814adaeeab61d4521474e",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "57c10915f2c16c90e0d46ad00876bf39ece40fc2",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.10"
},
{
"lessThan": "5.10",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.96",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.39",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "696CCB54-4E61-4603-AE9B-F4A19836CA65",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8E99FB01-CD93-41AF-A653-3F450652B9A6",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.11",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "092233C7-F4E0-40C8-BD4D-A28FE50DFE20",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "5.16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7046B092-F810-4440-ACE6-60218518EECE",
"versionEndExcluding": "6.6.145",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "38A8100E-2B1A-462F-AEE9-8901B870FEF2",
"versionEndExcluding": "6.12.96",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "914AE4BC-3D59-4C5A-9DB5-9CE327B429F7",
"versionEndExcluding": "6.18.39",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6228DDD6-4557-4AA3-9F43-AB995D471E42",
"versionEndExcluding": "7.1.4",
"versionStartIncluding": "6.19",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nInput: synaptics-rmi4 - bound the F3A keymap to the GPIO count\n\nrmi_f3a_initialize() takes the GPIO count from the device query register\n(f3a-\u003egpio_count = buf \u0026 RMI_F3A_GPIO_COUNT, range 0..127).\nrmi_f3a_map_gpios() then allocates gpio_key_map with\nmin(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but\nrmi_f3a_attention() iterates the full gpio_count and dereferences\ngpio_key_map[i], and input-\u003ekeycodemax is set to the full gpio_count\nwhile input-\u003ekeycode points at the 6-entry allocation.\n\nA device that reports gpio_count \u003e 6 therefore causes an out-of-bounds\nread of gpio_key_map[] on every attention interrupt, and out-of-bounds\naccesses through the input core\u0027s default keymap ioctls: EVIOCGKEYCODE\nreads past the buffer (leaking adjacent slab memory to user space) and\nEVIOCSKEYCODE writes a caller-controlled value past it, for any process\nable to open the evdev node, since input_default_getkeycode() and\ninput_default_setkeycode() only bound the index against keycodemax.\n\nSize the keymap for the full gpio_count. The mapping loop is unchanged:\nit still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)\nentries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)\nand are skipped when reporting."
},
{
"lang": "es",
"value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\nInput: synaptics-rmi4 - vincul\u00f3 el mapa de teclas F3A al recuento de GPIO\n\nrmi_f3a_initialize() toma el recuento de GPIO del registro de consulta del dispositivo (f3a -\u003e gpio_count = buf \u0026 RMI_F3A_GPIO_COUNT, rango 0..127).\nrmi_f3a_map_gpios() luego asigna gpio_key_map con min(gpio_count, TRACKSTICK_RANGE_END) == como m\u00e1ximo 6 entradas, pero rmi_f3a_attention() itera el gpio_count completo y desreferencia gpio_key_map[i], y input -\u003e keycodemax se establece en el gpio_count completo mientras que input -\u003e keycode apunta a la asignaci\u00f3n de 6 entradas.\n\nUn dispositivo que reporta gpio_count \u003e 6, por lo tanto, causa una lectura fuera de l\u00edmites de gpio_key_map[] en cada interrupci\u00f3n de atenci\u00f3n, y accesos fuera de l\u00edmites a trav\u00e9s de los ioctls del mapa de teclas predeterminado del n\u00facleo de entrada: EVIOCGKEYCODE lee m\u00e1s all\u00e1 del b\u00fafer (filtrando memoria slab adyacente al espacio de usuario) y EVIOCSKEYCODE escribe un valor controlado por el llamador m\u00e1s all\u00e1 de \u00e9l, para cualquier proceso capaz de abrir el nodo evdev, ya que input_default_getkeycode() y input_default_setkeycode() solo vincularon el \u00edndice contra keycodemax.\n\nDimensionar el mapa de teclas para el gpio_count completo. El bucle de mapeo no ha cambiado: todav\u00eda asigna solo las primeras min(gpio_count, TRACKSTICK_RANGE_END) entradas; las ranuras restantes permanecen KEY_RESERVED (devm_kcalloc rellena con ceros) y se omiten al informar."
}
],
"id": "CVE-2026-64277",
"lastModified": "2026-10-24T13:10:00.147",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-64277",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:38:13.158819Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-07-25T10:17:08.197",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/3480e24bc4e178aaa009edb25b6ee12df199e210"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/35ed74d32d8260bdfb14a94caf402bf0866bdeec"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/502ad7caaa1a445b734c827fa256e5311df67e3d"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/57c10915f2c16c90e0d46ad00876bf39ece40fc2"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/850117b637bcb1dcc14be0cf09ac819a8707b42c"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/8db211aed83733073b0814adaeeab61d4521474e"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/ba57f430328534501962d60d651e385ffd7af9ca"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
},
{
"description": [
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-07T04:26:53+00:00",
"cve": "CVE-2026-64277",
"id": "CVE-2026-64277",
"initial_release_date": "2026-07-25T00:00:00+00:00",
"product_status:fixed": "762",
"product_status:known_affected": "22",
"product_status:known_not_affected": "42",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-64277.json",
"version": "3"
},
"suse_vex": {
"aggregate_severity": "moderate",
"current_release_date": "2026-11-14T02:53:20Z",
"cve": "CVE-2026-64277",
"id": "CVE-2026-64277",
"initial_release_date": "2026-07-25T16:46:45Z",
"product_status:known_affected": "530",
"product_status:known_not_affected": "205",
"product_status:recommended": "435",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-64277",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-64277.json",
"version": "13"
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-64277",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:38:13.158819Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-787",
"description": "CWE-787 Out-of-bounds Write",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T15:38:13.858Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "502ad7caaa1a445b734c827fa256e5311df67e3d",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "3480e24bc4e178aaa009edb25b6ee12df199e210",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "35ed74d32d8260bdfb14a94caf402bf0866bdeec",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "ba57f430328534501962d60d651e385ffd7af9ca",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "850117b637bcb1dcc14be0cf09ac819a8707b42c",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "8db211aed83733073b0814adaeeab61d4521474e",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
},
{
"lessThan": "57c10915f2c16c90e0d46ad00876bf39ece40fc2",
"status": "affected",
"version": "9e4c596bfd004f447a652205163234dfd4aafa69",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/input/rmi4/rmi_f3a.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.10"
},
{
"lessThan": "5.10",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.96",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.39",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.145",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.96",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.39",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1.4",
"versionStartIncluding": "5.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2",
"versionStartIncluding": "5.10",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nInput: synaptics-rmi4 - bound the F3A keymap to the GPIO count\n\nrmi_f3a_initialize() takes the GPIO count from the device query register\n(f3a-\u003egpio_count = buf \u0026 RMI_F3A_GPIO_COUNT, range 0..127).\nrmi_f3a_map_gpios() then allocates gpio_key_map with\nmin(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but\nrmi_f3a_attention() iterates the full gpio_count and dereferences\ngpio_key_map[i], and input-\u003ekeycodemax is set to the full gpio_count\nwhile input-\u003ekeycode points at the 6-entry allocation.\n\nA device that reports gpio_count \u003e 6 therefore causes an out-of-bounds\nread of gpio_key_map[] on every attention interrupt, and out-of-bounds\naccesses through the input core\u0027s default keymap ioctls: EVIOCGKEYCODE\nreads past the buffer (leaking adjacent slab memory to user space) and\nEVIOCSKEYCODE writes a caller-controlled value past it, for any process\nable to open the evdev node, since input_default_getkeycode() and\ninput_default_setkeycode() only bound the index against keycodemax.\n\nSize the keymap for the full gpio_count. The mapping loop is unchanged:\nit still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)\nentries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)\nand are skipped when reporting."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The highest-severity defensible path is local: a process that can open the affected RMI touchpad\u0027s evdev node can invoke the vulnerable keymap ioctls. A malicious USB RMI device is also a physical trigger, but the local ioctl path is more severe.\nAC:L - On a vulnerable device reporting more than six GPIOs, selecting any keymap index from 6 through gpio_count-1 deterministically accesses beyond the allocation. No race or condition outside the attacker\u0027s control is required.\nPR:L - The evdev keymap ioctl path has no capability or authentication check; only ordinary device-node access controls apply. An unprivileged user with seat, ACL, or input-device access can exploit it without administrative capabilities.\nUI:N - The attacker directly issues EVIOCGKEYCODE or EVIOCSKEYCODE after opening the node. No action by another user is required.\nS:U - Exploitation compromises the host kernel within the same security authority. It does not inherently cross a VM, IOMMU, or other separate security boundary.\nC:H - EVIOCGKEYCODE can disclose successive 16-bit words across as much as 242 bytes beyond the six-entry keymap, exposing adjacent slab contents and potentially kernel pointers. The accompanying corruption can also support stronger disclosure primitives.\nI:H - EVIOCSKEYCODE provides indexed, caller-controlled 16-bit writes throughout the out-of-bounds range. This heap corruption can overwrite adjacent pointers or control data and plausibly enable kernel code execution.\nA:H - The controlled heap overwrite can corrupt adjacent slab objects and cause a kernel oops or panic, while device attention interrupts repeatedly exercise the out-of-bounds read. The failure can be triggered repeatedly without victim interaction."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-17T04:52:32.147Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/502ad7caaa1a445b734c827fa256e5311df67e3d"
},
{
"url": "https://git.kernel.org/stable/c/3480e24bc4e178aaa009edb25b6ee12df199e210"
},
{
"url": "https://git.kernel.org/stable/c/35ed74d32d8260bdfb14a94caf402bf0866bdeec"
},
{
"url": "https://git.kernel.org/stable/c/ba57f430328534501962d60d651e385ffd7af9ca"
},
{
"url": "https://git.kernel.org/stable/c/850117b637bcb1dcc14be0cf09ac819a8707b42c"
},
{
"url": "https://git.kernel.org/stable/c/8db211aed83733073b0814adaeeab61d4521474e"
},
{
"url": "https://git.kernel.org/stable/c/64fb0e1161ccc6b9e48b8df61f07d3c34c01ec42"
},
{
"url": "https://git.kernel.org/stable/c/57c10915f2c16c90e0d46ad00876bf39ece40fc2"
}
],
"title": "Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-64277",
"datePublished": "2026-07-25T08:49:21.936Z",
"dateReserved": "2026-07-19T15:36:31.776Z",
"dateUpdated": "2026-10-19T20:28:17.252Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…