CVE-2026-46022 (GCVE-0-2026-46022)
Vulnerability from cvelistv5 – Published: 2026-05-27 12:56 – Updated: 2026-10-15 01:20
VLAI
EPSS
VEX
Title
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
Summary
In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient.
Severity
7.1 (High)
Assigner
References
9 references
Impacted products
3 products
| Vendor | Product | Version | |
|---|---|---|---|
| Linux | Linux |
Affected:
278d72ae8803ffcd16070c95fe1d53f4466dc741 , < 6f6ecc9153df176e956d0664b56f93080b0a45f0
(git)
Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < bac8643486f854dd53af9b23aea7dbbd9b7c1865 (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < f7e5b4eefd7be3e09f8bd5fee63ed478fd7446ab (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < fc7e9a74e32299d7e93e178ca482a0b59ef1595b (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < 07c4f18b303106e6b24492c12b95d48a4b985841 (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < 22a16d3eafee92a165c756081587c95850127107 (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < 1ca75f6b74ec7f685464e5745ecfcf3a76d284e9 (git) Affected: 278d72ae8803ffcd16070c95fe1d53f4466dc741 , < 4b6e6ead556734bdc14024c5f837132b1e7a4b84 (git) |
|
| Linux | Linux |
Affected:
2.6.13
Unaffected: 0 , < 2.6.13 (semver) Unaffected: 5.10.258 , ≤ 5.10.* (semver) Unaffected: 5.15.209 , ≤ 5.15.* (semver) Unaffected: 6.1.175 , ≤ 6.1.* (semver) Unaffected: 6.6.140 , ≤ 6.6.* (semver) Unaffected: 6.12.86 , ≤ 6.12.* (semver) Unaffected: 6.18.27 , ≤ 6.18.* (semver) Unaffected: 7.0.4 , ≤ 7.0.* (semver) Unaffected: 7.1 , ≤ * (original_commit_for_fix) |
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < *
(custom)
|
{
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T01:20:00.194Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/misc/ibmasm/remote.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "6f6ecc9153df176e956d0664b56f93080b0a45f0",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "bac8643486f854dd53af9b23aea7dbbd9b7c1865",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "f7e5b4eefd7be3e09f8bd5fee63ed478fd7446ab",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "fc7e9a74e32299d7e93e178ca482a0b59ef1595b",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "07c4f18b303106e6b24492c12b95d48a4b985841",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "22a16d3eafee92a165c756081587c95850127107",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "1ca75f6b74ec7f685464e5745ecfcf3a76d284e9",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "4b6e6ead556734bdc14024c5f837132b1e7a4b84",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/misc/ibmasm/remote.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.13"
},
{
"lessThan": "2.6.13",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.86",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.27",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.86",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.27",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.4",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "2.6.13",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmisc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()\n\nibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read\nwhen the queue reader or writer index from hardware exceeds\nREMOTE_QUEUE_SIZE (60).\n\nA compromised service processor can trigger this by writing an\nout-of-range value to the reader or writer MMIO register before\nasserting an interrupt. Since writer is re-read from hardware on\nevery loop iteration, it can also be set to an out-of-range value\nafter the loop has already started.\n\nThe root cause is that get_queue_reader() and get_queue_writer() return\nraw readl() values that are passed directly into get_queue_entry(),\nwhich computes:\n\n queue_begin + reader * sizeof(struct remote_input)\n\nwith no bounds check. This unchecked MMIO address is then passed to\nmemcpy_fromio(), reading 8 bytes from unintended device registers.\nFor sufficiently large values the address falls outside the PCI BAR\nmapping entirely, triggering a machine check exception.\n\nFix by checking both indices against REMOTE_QUEUE_SIZE at the top of\nthe loop body, before any call to get_queue_entry(). On an out-of-range\nvalue, reset the reader register to 0 via set_queue_reader() before\nbreaking, so that normal queue operation can resume if the corrupted\nhardware state is transient."
}
],
"providerMetadata": {
"dateUpdated": "2026-06-14T17:48:35.855Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/6f6ecc9153df176e956d0664b56f93080b0a45f0"
},
{
"url": "https://git.kernel.org/stable/c/bac8643486f854dd53af9b23aea7dbbd9b7c1865"
},
{
"url": "https://git.kernel.org/stable/c/f7e5b4eefd7be3e09f8bd5fee63ed478fd7446ab"
},
{
"url": "https://git.kernel.org/stable/c/fc7e9a74e32299d7e93e178ca482a0b59ef1595b"
},
{
"url": "https://git.kernel.org/stable/c/07c4f18b303106e6b24492c12b95d48a4b985841"
},
{
"url": "https://git.kernel.org/stable/c/22a16d3eafee92a165c756081587c95850127107"
},
{
"url": "https://git.kernel.org/stable/c/1ca75f6b74ec7f685464e5745ecfcf3a76d284e9"
},
{
"url": "https://git.kernel.org/stable/c/4b6e6ead556734bdc14024c5f837132b1e7a4b84"
}
],
"title": "misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46022",
"datePublished": "2026-05-27T12:56:26.791Z",
"dateReserved": "2026-05-13T15:03:33.092Z",
"dateUpdated": "2026-10-15T01:20:00.194Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-46022",
"date": "2026-11-17",
"epss": "0.00148",
"percentile": "0.04057"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/misc/ibmasm/remote.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "6f6ecc9153df176e956d0664b56f93080b0a45f0",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "bac8643486f854dd53af9b23aea7dbbd9b7c1865",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "f7e5b4eefd7be3e09f8bd5fee63ed478fd7446ab",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "fc7e9a74e32299d7e93e178ca482a0b59ef1595b",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "07c4f18b303106e6b24492c12b95d48a4b985841",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "22a16d3eafee92a165c756081587c95850127107",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "1ca75f6b74ec7f685464e5745ecfcf3a76d284e9",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
},
{
"lessThan": "4b6e6ead556734bdc14024c5f837132b1e7a4b84",
"status": "affected",
"version": "278d72ae8803ffcd16070c95fe1d53f4466dc741",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/misc/ibmasm/remote.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.13"
},
{
"lessThan": "2.6.13",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.86",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.27",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "415B1C77-1872-4566-B252-F4D1F459F7F9",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "2.6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "919C10A9-7951-4A74-BADD-C135A0A8D8B4",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "5.11",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "92385813-D91D-480D-83A1-F423D2CBB2BA",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "5.16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A1A92866-F406-43B5-B2D1-CFC274753E9D",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "55DA1C62-9991-451E-B8A8-E0004E00F789",
"versionEndExcluding": "6.12.86",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A10AC84F-C058-47D5-85B4-E6E51A613B74",
"versionEndExcluding": "6.18.27",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "CDB78D6D-22C3-4154-B0D0-94AF1CE5C2E3",
"versionEndExcluding": "7.0.4",
"versionStartIncluding": "6.19",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmisc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()\n\nibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read\nwhen the queue reader or writer index from hardware exceeds\nREMOTE_QUEUE_SIZE (60).\n\nA compromised service processor can trigger this by writing an\nout-of-range value to the reader or writer MMIO register before\nasserting an interrupt. Since writer is re-read from hardware on\nevery loop iteration, it can also be set to an out-of-range value\nafter the loop has already started.\n\nThe root cause is that get_queue_reader() and get_queue_writer() return\nraw readl() values that are passed directly into get_queue_entry(),\nwhich computes:\n\n queue_begin + reader * sizeof(struct remote_input)\n\nwith no bounds check. This unchecked MMIO address is then passed to\nmemcpy_fromio(), reading 8 bytes from unintended device registers.\nFor sufficiently large values the address falls outside the PCI BAR\nmapping entirely, triggering a machine check exception.\n\nFix by checking both indices against REMOTE_QUEUE_SIZE at the top of\nthe loop body, before any call to get_queue_entry(). On an out-of-range\nvalue, reset the reader register to 0 via set_queue_reader() before\nbreaking, so that normal queue operation can resume if the corrupted\nhardware state is transient."
}
],
"id": "CVE-2026-46022",
"lastModified": "2026-10-15T02:19:38.767",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.1,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.2,
"source": "nvd@nist.gov",
"type": "Primary"
}
]
},
"published": "2026-05-27T14:17:20.670",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/07c4f18b303106e6b24492c12b95d48a4b985841"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/1ca75f6b74ec7f685464e5745ecfcf3a76d284e9"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/22a16d3eafee92a165c756081587c95850127107"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/4b6e6ead556734bdc14024c5f837132b1e7a4b84"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/6f6ecc9153df176e956d0664b56f93080b0a45f0"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/bac8643486f854dd53af9b23aea7dbbd9b7c1865"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/f7e5b4eefd7be3e09f8bd5fee63ed478fd7446ab"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/fc7e9a74e32299d7e93e178ca482a0b59ef1595b"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-05T21:00:25+00:00",
"cve": "CVE-2026-46022",
"id": "CVE-2026-46022",
"initial_release_date": "2026-05-27T00:00:00+00:00",
"product_status:known_affected": "14",
"product_status:known_not_affected": "186",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-46022.json",
"version": "3"
},
"suse_vex": {
"aggregate_severity": "moderate",
"current_release_date": "2026-08-27T16:57:14Z",
"cve": "CVE-2026-46022",
"id": "CVE-2026-46022",
"initial_release_date": "2026-05-28T03:54:13Z",
"product_status:known_affected": "301",
"product_status:recommended": "4",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-46022",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-46022.json",
"version": "7"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…