CVE-2026-128909 (GCVE-0-2026-128909)
Vulnerability from cvelistv5 – Published: 2026-11-13 14:30 – Updated: 2026-11-13 14:30 Unsupported When Assigned
VLAI
EPSS
VEX
Title
DJI AeroScope Mobile: Firmware updates are not signature-verified
Summary
Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
Severity
8.8 (High)
CWE
Assigner
References
3 references
| URL | Tags |
|---|---|
| https://cyber-defence-campus.github.io/projects/v… | third-party-advisory |
| https://www.dji.com/aeroscope | product |
| https://github.com/llorencroma/dji-aeroscope-root | technical-description |
Impacted products
2 products
| Vendor | Product | Version | |
|---|---|---|---|
| DJI | AeroScope Mobile (TP703) |
Affected:
03.00.00.26
(custom)
|
|
| DJI | AeroScope Mobile (TP703) 1300 communications board firmware |
Affected:
02.00.07.12 , ≤ 02.00.08.40
(custom)
|
{
"containers": {
"cna": {
"affected": [
{
"collectionURL": "https://www.dji.com",
"defaultStatus": "unknown",
"modules": [
"1300 DM810X communications board (uavmonitor_usbv1)"
],
"platforms": [
"ARM"
],
"product": "AeroScope Mobile (TP703)",
"programFiles": [
"opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
],
"vendor": "DJI",
"versions": [
{
"status": "affected",
"version": "03.00.00.26",
"versionType": "custom"
}
]
},
{
"collectionURL": "https://www.dji.com",
"defaultStatus": "unknown",
"platforms": [
"ARM"
],
"product": "AeroScope Mobile (TP703) 1300 communications board firmware",
"programFiles": [
"opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
],
"vendor": "DJI",
"versions": [
{
"lessThanOrEqual": "02.00.08.40",
"status": "affected",
"version": "02.00.07.12",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Lloren\u00e7 Rom\u00e1 Alvarez, Security Researcher, Cyber Defence Campus, Switzerland"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device.\u003c/p\u003e\u003cp\u003eNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.\u003c/p\u003e"
}
],
"value": "Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "Primary score assumes Adjacent (AV:A) reach via the L2 multicast arming handshake. If the management interface is IP-routed/bridged, the TCP 16000 firmware-flash dispatch is reachable at Network scope: use AV:N -\u003e CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H = 9.8 CRITICAL."
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-347",
"description": "CWE-347 Improper Verification of Cryptographic Signature",
"lang": "en",
"type": "CWE"
},
{
"cweId": "CWE-494",
"description": "CWE-494 Download of Code Without Integrity Check",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-13T14:30:49.416Z",
"orgId": "455daabc-a392-441d-aa46-37d35189897c",
"shortName": "NCSC.ch"
},
"references": [
{
"name": "Cyber Defence Campus vulnerability advisories",
"tags": [
"third-party-advisory"
],
"url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128909/"
},
{
"name": "DJI AeroScope product page",
"tags": [
"product"
],
"url": "https://www.dji.com/aeroscope"
},
{
"name": "DJI AeroScope Mobile research repository (technical details)",
"tags": [
"technical-description"
],
"url": "https://github.com/llorencroma/dji-aeroscope-root"
}
],
"solutions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds.\u003c/p\u003e"
}
],
"value": "DJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds."
}
],
"source": {
"discovery": "EXTERNAL"
},
"tags": [
"unsupported-when-assigned"
],
"timeline": [
{
"lang": "en",
"time": "2026-09-25T00:00:00.000Z",
"value": "Reproduced in emulation of the unmodified device binaries"
},
{
"lang": "en",
"time": "2026-09-25T00:00:00.000Z",
"value": "Reported to DJI"
},
{
"lang": "en",
"time": "2026-11-04T00:00:00.000Z",
"value": "DJI acknowledged the vulnerability and provided its assessment"
}
],
"title": "DJI AeroScope Mobile: Firmware updates are not signature-verified",
"workarounds": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eConnect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached. The device has no setting that enables signature checking of firmware updates.\u003c/p\u003e"
}
],
"value": "Connect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached. The device has no setting that enables signature checking of firmware updates."
}
],
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "455daabc-a392-441d-aa46-37d35189897c",
"assignerShortName": "NCSC.ch",
"cveId": "CVE-2026-128909",
"datePublished": "2026-11-13T14:30:49.416Z",
"dateReserved": "2026-11-13T12:42:54.791Z",
"dateUpdated": "2026-11-13T14:30:49.416Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-128909",
"date": "2026-11-16",
"epss": "0.00141",
"percentile": "0.03482"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://www.dji.com",
"defaultStatus": "unknown",
"modules": [
"1300 DM810X communications board (uavmonitor_usbv1)"
],
"platforms": [
"ARM"
],
"product": "AeroScope Mobile (TP703)",
"programFiles": [
"opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
],
"vendor": "DJI",
"versions": [
{
"status": "affected",
"version": "03.00.00.26",
"versionType": "custom"
}
]
},
{
"collectionURL": "https://www.dji.com",
"defaultStatus": "unknown",
"platforms": [
"ARM"
],
"product": "AeroScope Mobile (TP703) 1300 communications board firmware",
"programFiles": [
"opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
],
"vendor": "DJI",
"versions": [
{
"lessThanOrEqual": "02.00.08.40",
"status": "affected",
"version": "02.00.07.12",
"versionType": "custom"
}
]
}
],
"source": "vulnerability@ncsc.ch"
}
],
"cveTags": [
{
"sourceIdentifier": "vulnerability@ncsc.ch",
"tags": [
"unsupported-when-assigned"
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
}
],
"id": "CVE-2026-128909",
"lastModified": "2026-11-13T15:17:44.753",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 5.9,
"source": "vulnerability@ncsc.ch",
"type": "Secondary"
}
]
},
"published": "2026-11-13T15:17:44.753",
"references": [
{
"source": "vulnerability@ncsc.ch",
"url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128909/"
},
{
"source": "vulnerability@ncsc.ch",
"url": "https://github.com/llorencroma/dji-aeroscope-root"
},
{
"source": "vulnerability@ncsc.ch",
"url": "https://www.dji.com/aeroscope"
}
],
"sourceIdentifier": "vulnerability@ncsc.ch",
"vulnStatus": "Received",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-347"
},
{
"lang": "en",
"value": "CWE-494"
}
],
"source": "vulnerability@ncsc.ch",
"type": "Secondary"
}
]
}
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…