CVE-2026-128908 (GCVE-0-2026-128908)

Vulnerability from cvelistv5 – Published: 2026-11-13 14:29 – Updated: 2026-11-13 14:29 Unsupported When Assigned
VLAI
Title
DJI AeroScope Mobile: OS command injection leads to root code execution
Summary
OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
CWE
  • CWE-78 - Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
References
Impacted products
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "collectionURL": "https://www.dji.com",
          "defaultStatus": "unknown",
          "modules": [
            "1300 DM810X communications board (uavmonitor_usbv1)"
          ],
          "platforms": [
            "ARM"
          ],
          "product": "AeroScope Mobile (TP703)",
          "programFiles": [
            "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
          ],
          "vendor": "DJI",
          "versions": [
            {
              "status": "affected",
              "version": "03.00.00.26",
              "versionType": "custom"
            }
          ]
        },
        {
          "collectionURL": "https://www.dji.com",
          "defaultStatus": "unknown",
          "platforms": [
            "ARM"
          ],
          "product": "AeroScope Mobile (TP703) 1300 communications board firmware",
          "programFiles": [
            "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
          ],
          "vendor": "DJI",
          "versions": [
            {
              "lessThanOrEqual": "02.00.08.40",
              "status": "affected",
              "version": "02.00.07.12",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Lloren\u00e7 Rom\u00e1 Alvarez, Security Researcher, Cyber Defence Campus, Switzerland"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eOS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device.\u003c/p\u003e\u003cp\u003eNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.\u003c/p\u003e"
            }
          ],
          "value": "OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "Primary score assumes Adjacent (AV:A) reach via the L2 multicast arming handshake. If the management interface is IP-routed/bridged, use AV:N -\u003e CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H = 9.8 CRITICAL."
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-78",
              "description": "CWE-78 Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-13T14:29:28.584Z",
        "orgId": "455daabc-a392-441d-aa46-37d35189897c",
        "shortName": "NCSC.ch"
      },
      "references": [
        {
          "name": "Cyber Defence Campus vulnerability advisories",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128908/"
        },
        {
          "name": "DJI AeroScope product page",
          "tags": [
            "product"
          ],
          "url": "https://www.dji.com/aeroscope"
        },
        {
          "name": "DJI AeroScope Mobile research repository (technical details)",
          "tags": [
            "technical-description"
          ],
          "url": "https://github.com/llorencroma/dji-aeroscope-root"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eDJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds.\u003c/p\u003e"
            }
          ],
          "value": "DJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds."
        }
      ],
      "source": {
        "discovery": "EXTERNAL"
      },
      "tags": [
        "unsupported-when-assigned"
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-09-25T00:00:00.000Z",
          "value": "Confirmed on a physical device"
        },
        {
          "lang": "en",
          "time": "2026-09-25T00:00:00.000Z",
          "value": "Reported to DJI"
        },
        {
          "lang": "en",
          "time": "2026-11-04T00:00:00.000Z",
          "value": "DJI acknowledged the vulnerability and provided its assessment"
        }
      ],
      "title": "DJI AeroScope Mobile: OS command injection leads to root code execution",
      "workarounds": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eConnect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached.\u003c/p\u003e"
            }
          ],
          "value": "Connect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 1.0.5"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "455daabc-a392-441d-aa46-37d35189897c",
    "assignerShortName": "NCSC.ch",
    "cveId": "CVE-2026-128908",
    "datePublished": "2026-11-13T14:29:28.584Z",
    "dateReserved": "2026-11-13T12:42:53.330Z",
    "dateUpdated": "2026-11-13T14:29:28.584Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-128908",
      "date": "2026-11-16",
      "epss": "0.01882",
      "percentile": "0.79824"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://www.dji.com",
                "defaultStatus": "unknown",
                "modules": [
                  "1300 DM810X communications board (uavmonitor_usbv1)"
                ],
                "platforms": [
                  "ARM"
                ],
                "product": "AeroScope Mobile (TP703)",
                "programFiles": [
                  "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
                ],
                "vendor": "DJI",
                "versions": [
                  {
                    "status": "affected",
                    "version": "03.00.00.26",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "collectionURL": "https://www.dji.com",
                "defaultStatus": "unknown",
                "platforms": [
                  "ARM"
                ],
                "product": "AeroScope Mobile (TP703) 1300 communications board firmware",
                "programFiles": [
                  "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
                ],
                "vendor": "DJI",
                "versions": [
                  {
                    "lessThanOrEqual": "02.00.08.40",
                    "status": "affected",
                    "version": "02.00.07.12",
                    "versionType": "custom"
                  }
                ]
              }
            ],
            "source": "vulnerability@ncsc.ch"
          }
        ],
        "cveTags": [
          {
            "sourceIdentifier": "vulnerability@ncsc.ch",
            "tags": [
              "unsupported-when-assigned"
            ]
          }
        ],
        "descriptions": [
          {
            "lang": "en",
            "value": "OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
          }
        ],
        "id": "CVE-2026-128908",
        "lastModified": "2026-11-13T15:17:44.610",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "ADJACENT_NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 8.8,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "HIGH",
                "integrityImpact": "HIGH",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 2.8,
              "impactScore": 5.9,
              "source": "vulnerability@ncsc.ch",
              "type": "Secondary"
            }
          ]
        },
        "published": "2026-11-13T15:17:44.610",
        "references": [
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128908/"
          },
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://github.com/llorencroma/dji-aeroscope-root"
          },
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://www.dji.com/aeroscope"
          }
        ],
        "sourceIdentifier": "vulnerability@ncsc.ch",
        "vulnStatus": "Received",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-78"
              }
            ],
            "source": "vulnerability@ncsc.ch",
            "type": "Secondary"
          }
        ]
      }
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…