CVE-2026-107569 (GCVE-0-2026-107569)

Vulnerability from cvelistv5 – Published: 2026-10-19 15:34 – Updated: 2026-10-20 19:27
VLAI
Title
Unchecked Input for Loop Condition in hMailServer
Summary
Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message's X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail service. The Sieve notify action (from 6.2.22) consulted no limit at all, and its increment of the count could overflow a signed integer; and an account could reset the counter on its own mail through a Sieve editheader of the header (from 6.2.22) or a rule Set header value action (all versions) ahead of a forward or redirect.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-20 19:27 UTC
CWE
  • CWE-606 - Unchecked Input for Loop Condition
Impacted products
Vendor Product Version
Progressive Robot Ltd hMailServer Affected: 6.0.0 , ≤ 6.3.6 (semver)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-107569",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-20T19:27:14.386515Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-10-20T19:27:26.604Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "hMailServer",
          "repo": "https://gitlab.com/hmailserver/hmailserver",
          "vendor": "Progressive Robot Ltd",
          "versions": [
            {
              "lessThanOrEqual": "6.3.6",
              "status": "affected",
              "version": "6.0.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Found in the hMailServer project\u0027s own security review (Progressive Robot Ltd)"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message\u0027s X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail service. The Sieve notify action (from 6.2.22) consulted no limit at all, and its increment of the count could overflow a signed integer; and an account could reset the counter on its own mail through a Sieve editheader of the header (from 6.2.22) or a rule Set header value action (all versions) ahead of a forward or redirect."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-606",
              "description": "CWE-606: Unchecked Input for Loop Condition",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-19T15:34:37.492Z",
        "orgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
        "shortName": "GitLab"
      },
      "references": [
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/work_items/81"
        },
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.7"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "Upgrade to hMailServer 6.3.7, which reads X-hMailServer-LoopCount in one validated place (a count only when it is digits and never above the limit; anything else is read as the limit so no generated mail is made from it), holds a Sieve notify to the same limit, and refuses an account Sieve script or rule that edits the counter, and writes a line break in a header value as spaces unless it folds the line, so that no value a generated message is built from writes a field of its own. Until then there is no setting that stops the header being read or that turns Sieve off: reduce forwarding and auto-reply arrangements that can feed one another, keep the Sieve script surfaces closed to accounts (ManageSieveServerPort=0, the default, and the REST API off where it is not needed, RestApiPort=0, the default), review active Sieve scripts and account rules for a notify of the account\u0027s own address and for an edit of X-hMailServer-LoopCount, and watch the queue for a message generated far past the loop limit."
        }
      ],
      "title": "Unchecked Input for Loop Condition in hMailServer"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
    "assignerShortName": "GitLab",
    "cveId": "CVE-2026-107569",
    "datePublished": "2026-10-19T15:34:37.492Z",
    "dateReserved": "2026-10-08T10:51:10.642Z",
    "dateUpdated": "2026-10-20T19:27:26.604Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-107569",
      "date": "2026-11-16",
      "epss": "0.00372",
      "percentile": "0.31615"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "hMailServer",
                "repo": "https://gitlab.com/hmailserver/hmailserver",
                "vendor": "Progressive Robot Ltd",
                "versions": [
                  {
                    "lessThanOrEqual": "6.3.6",
                    "status": "affected",
                    "version": "6.0.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "cve@gitlab.com"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message\u0027s X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail service. The Sieve notify action (from 6.2.22) consulted no limit at all, and its increment of the count could overflow a signed integer; and an account could reset the counter on its own mail through a Sieve editheader of the header (from 6.2.22) or a rule Set header value action (all versions) ahead of a forward or redirect."
          }
        ],
        "id": "CVE-2026-107569",
        "lastModified": "2026-10-20T20:17:13.973",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 7.5,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 3.9,
              "impactScore": 3.6,
              "source": "cve@gitlab.com",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-107569",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "yes"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-20T19:27:14.386515Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-10-19T16:17:01.830",
        "references": [
          {
            "source": "cve@gitlab.com",
            "url": "https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.7"
          },
          {
            "source": "cve@gitlab.com",
            "url": "https://gitlab.com/hmailserver/hmailserver/-/work_items/81"
          }
        ],
        "sourceIdentifier": "cve@gitlab.com",
        "vulnStatus": "Deferred",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-606"
              }
            ],
            "source": "cve@gitlab.com",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-107569",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "yes"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-10-20T19:27:14.386515Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-10-20T19:27:22.333Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "hMailServer",
              "repo": "https://gitlab.com/hmailserver/hmailserver",
              "vendor": "Progressive Robot Ltd",
              "versions": [
                {
                  "lessThanOrEqual": "6.3.6",
                  "status": "affected",
                  "version": "6.0.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "credits": [
            {
              "lang": "en",
              "type": "finder",
              "value": "Found in the hMailServer project\u0027s own security review (Progressive Robot Ltd)"
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message\u0027s X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail service. The Sieve notify action (from 6.2.22) consulted no limit at all, and its increment of the count could overflow a signed integer; and an account could reset the counter on its own mail through a Sieve editheader of the header (from 6.2.22) or a rule Set header value action (all versions) ahead of a forward or redirect."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "attackComplexity": "LOW",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 7.5,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "format": "CVSS",
              "scenarios": [
                {
                  "lang": "en",
                  "value": "GENERAL"
                }
              ]
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-606",
                  "description": "CWE-606: Unchecked Input for Loop Condition",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-10-19T15:34:37.492Z",
            "orgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
            "shortName": "GitLab"
          },
          "references": [
            {
              "url": "https://gitlab.com/hmailserver/hmailserver/-/work_items/81"
            },
            {
              "url": "https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.7"
            }
          ],
          "solutions": [
            {
              "lang": "en",
              "value": "Upgrade to hMailServer 6.3.7, which reads X-hMailServer-LoopCount in one validated place (a count only when it is digits and never above the limit; anything else is read as the limit so no generated mail is made from it), holds a Sieve notify to the same limit, and refuses an account Sieve script or rule that edits the counter, and writes a line break in a header value as spaces unless it folds the line, so that no value a generated message is built from writes a field of its own. Until then there is no setting that stops the header being read or that turns Sieve off: reduce forwarding and auto-reply arrangements that can feed one another, keep the Sieve script surfaces closed to accounts (ManageSieveServerPort=0, the default, and the REST API off where it is not needed, RestApiPort=0, the default), review active Sieve scripts and account rules for a notify of the account\u0027s own address and for an edit of X-hMailServer-LoopCount, and watch the queue for a message generated far past the loop limit."
            }
          ],
          "title": "Unchecked Input for Loop Condition in hMailServer"
        }
      },
      "cveMetadata": {
        "assignerOrgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
        "assignerShortName": "GitLab",
        "cveId": "CVE-2026-107569",
        "datePublished": "2026-10-19T15:34:37.492Z",
        "dateReserved": "2026-10-08T10:51:10.642Z",
        "dateUpdated": "2026-10-20T19:27:26.604Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…