CVE-2026-93669 (GCVE-0-2026-93669)
Vulnerability from cvelistv5 – Published: 2026-11-16 21:19 – Updated: 2026-11-16 21:19
VLAI
EPSS
VEX
Title
NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization
Summary
The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).
If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.
The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.
The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.
Severity
4.7 (Medium)
CWE
- CWE-476 - memory-safety
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| zephyrproject | zephyr |
Affected:
3.4.0 , < 4.3.2
(semver)
Affected: 4.4.0 , < 4.5.0 (semver) |
{
"containers": {
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c"
],
"programRoutines": [
{
"name": "shi_ite_init_registers"
},
{
"name": "shi_ite_int_handler"
},
{
"name": "shi_ite_parse_header"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.3.2",
"status": "affected",
"version": "3.4.0",
"versionType": "semver"
},
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data-\u003erx_ctx and data-\u003etx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).\n\nIf the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data-\u003erx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.\n\nThe result is a kernel panic on the embedded controller: with Zephyr\u0027s default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware\u0027s point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.\n\nThe fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data-\u003erx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 4.7,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-476",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-16T21:19:17.897Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632"
},
{
"name": "GHSA-xqxg-8rx7-42hq",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq"
}
],
"title": "NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-93669",
"datePublished": "2026-11-16T21:19:17.897Z",
"dateReserved": "2026-09-18T13:48:54.198Z",
"dateUpdated": "2026-11-16T21:19:17.897Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c"
],
"programRoutines": [
{
"name": "shi_ite_init_registers"
},
{
"name": "shi_ite_int_handler"
},
{
"name": "shi_ite_parse_header"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.3.2",
"status": "affected",
"version": "3.4.0",
"versionType": "semver"
},
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data-\u003erx_ctx and data-\u003etx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).\n\nIf the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data-\u003erx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.\n\nThe result is a kernel panic on the embedded controller: with Zephyr\u0027s default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware\u0027s point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.\n\nThe fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data-\u003erx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm."
}
],
"id": "CVE-2026-93669",
"lastModified": "2026-11-16T22:18:26.683",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 4.7,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.0,
"impactScore": 3.6,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
},
"published": "2026-11-16T22:18:26.577",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-476"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…