CVE-2026-90587 (GCVE-0-2026-90587)
Vulnerability from cvelistv5 – Published: 2026-11-09 22:03 – Updated: 2026-11-12 17:18
VLAI
EPSS
VEX
Title
NULL pointer dereference in the Zephyr USB host stack when a device reports zero configurations
Summary
usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() — the only place udev->cfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev->cfg_desc remains NULL.
usbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev->cfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head->bLength is read through a NULL pointer.
The condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment.
On targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev->cfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental.
Severity
4.6 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-12 17:18 UTC
CWE
- CWE-476 - memory-safety
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| zephyrproject | zephyr |
Affected:
4.4.0 , < 4.5.0
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-90587",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-12T17:18:32.385537Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-12T17:18:45.997Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/usb/host/usbh_class.c",
"subsys/usb/host/usbh_desc.c",
"subsys/usb/host/usbh_device.c"
],
"programRoutines": [
{
"name": "usbh_class_probe_device"
},
{
"name": "usbh_desc_get_next_function"
},
{
"name": "usbh_device_init"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() \u2014 the only place udev-\u003ecfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev-\u003ecfg_desc remains NULL.\n\nusbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev-\u003ecfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head-\u003ebLength is read through a NULL pointer.\n\nThe condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment.\n\nOn targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev-\u003ecfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 4.6,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-476",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-09T22:03:59.315Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/04e4284b4c3d3cd41791d44d7c39361e268b4d02"
},
{
"name": "GHSA-9pxv-6992-2g24",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-9pxv-6992-2g24"
}
],
"title": "NULL pointer dereference in the Zephyr USB host stack when a device reports zero configurations",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-90587",
"datePublished": "2026-11-09T22:03:59.315Z",
"dateReserved": "2026-09-12T18:04:39.470Z",
"dateUpdated": "2026-11-12T17:18:45.997Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-90587",
"date": "2026-11-16",
"epss": "0.00178",
"percentile": "0.07413"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/usb/host/usbh_class.c",
"subsys/usb/host/usbh_desc.c",
"subsys/usb/host/usbh_device.c"
],
"programRoutines": [
{
"name": "usbh_class_probe_device"
},
{
"name": "usbh_desc_get_next_function"
},
{
"name": "usbh_device_init"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() \u2014 the only place udev-\u003ecfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev-\u003ecfg_desc remains NULL.\n\nusbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev-\u003ecfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head-\u003ebLength is read through a NULL pointer.\n\nThe condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment.\n\nOn targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev-\u003ecfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental."
}
],
"id": "CVE-2026-90587",
"lastModified": "2026-11-12T18:17:54.463",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "PHYSICAL",
"availabilityImpact": "HIGH",
"baseScore": 4.6,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 0.9,
"impactScore": 3.6,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-90587",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-12T17:18:32.385537Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-11-09T22:18:56.970",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/04e4284b4c3d3cd41791d44d7c39361e268b4d02"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-9pxv-6992-2g24"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-476"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-90587",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-12T17:18:32.385537Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-12T17:18:39.943Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/usb/host/usbh_class.c",
"subsys/usb/host/usbh_desc.c",
"subsys/usb/host/usbh_device.c"
],
"programRoutines": [
{
"name": "usbh_class_probe_device"
},
{
"name": "usbh_desc_get_next_function"
},
{
"name": "usbh_device_init"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() \u2014 the only place udev-\u003ecfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev-\u003ecfg_desc remains NULL.\n\nusbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev-\u003ecfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head-\u003ebLength is read through a NULL pointer.\n\nThe condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment.\n\nOn targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev-\u003ecfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 4.6,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-476",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-09T22:03:59.315Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/04e4284b4c3d3cd41791d44d7c39361e268b4d02"
},
{
"name": "GHSA-9pxv-6992-2g24",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-9pxv-6992-2g24"
}
],
"title": "NULL pointer dereference in the Zephyr USB host stack when a device reports zero configurations",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-90587",
"datePublished": "2026-11-09T22:03:59.315Z",
"dateReserved": "2026-09-12T18:04:39.470Z",
"dateUpdated": "2026-11-12T17:18:45.997Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…