CVE-2026-89865 (GCVE-0-2026-89865)
Vulnerability from cvelistv5 – Published: 2026-09-16 10:31 – Updated: 2026-10-19 08:53
VLAI
EPSS
VEX
Title
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
Summary
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes from the 256-byte pool
buffer. Since only a small prefix was written
(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU
status register), the hardware reads past the initialized region and
writes up to ~219 bytes of stale DMA-pool heap memory to the device
flash.
Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers
so any bytes beyond the initialized data are zero rather than stale heap
contents.
Severity
No CVSS data available.
Assigner
References
8 references
Impacted products
2 products
| Vendor | Product | Version | |
|---|---|---|---|
| Linux | Linux |
Affected:
697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < a476377a66897549dd49bee319f4df66623417b7
(git)
Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < 09703bc7c0be3a7a155b0ff5f21f6765ba3f519c (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < 97c45c75f5cdec96b1a4fba8b1d55d0dd01af1e8 (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < 84bde5ce4038d9ad811e5c994305bbfcbd7a9f79 (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < 581590f560b74399151b3cbc88574424c2f3d2dc (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < b157256c28086c434afd70cc78bf9b4d8caf1276 (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < a5501c42256235523c4dddf799f032dfbf4f4c77 (git) Affected: 697a4bc69159c3396035b0506ffa55c4b2d0b1f4 , < b47d4a1547d9ef21b2e9d1a739fe2204d4be05dc (git) |
|
| Linux | Linux |
Affected:
3.2
Unaffected: 0 , < 3.2 (semver) Unaffected: 5.10.270 , ≤ 5.10.* (semver) Unaffected: 5.15.221 , ≤ 5.15.* (semver) Unaffected: 6.1.188 , ≤ 6.1.* (semver) Unaffected: 6.6.157 , ≤ 6.6.* (semver) Unaffected: 6.12.110 , ≤ 6.12.* (semver) Unaffected: 6.18.51 , ≤ 6.18.* (semver) Unaffected: 7.2.5 , ≤ 7.2.* (semver) Unaffected: 7.3 , ≤ * (original_commit_for_fix) |
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/scsi/qla2xxx/qla_bsg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "a476377a66897549dd49bee319f4df66623417b7",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "09703bc7c0be3a7a155b0ff5f21f6765ba3f519c",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "97c45c75f5cdec96b1a4fba8b1d55d0dd01af1e8",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "84bde5ce4038d9ad811e5c994305bbfcbd7a9f79",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "581590f560b74399151b3cbc88574424c2f3d2dc",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "b157256c28086c434afd70cc78bf9b4d8caf1276",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "a5501c42256235523c4dddf799f032dfbf4f4c77",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "b47d4a1547d9ef21b2e9d1a739fe2204d4be05dc",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/scsi/qla2xxx/qla_bsg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.2"
},
{
"lessThan": "3.2",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.270",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.110",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.51",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.270",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.221",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.188",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.157",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.110",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.51",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2.5",
"versionStartIncluding": "3.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.3",
"versionStartIncluding": "3.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers\n\nThe FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE\n(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not\nzero the allocation. They initialize only a few leading bytes before\nhanding the buffer to qla2x00_write_sfp().\n\nqla2x00_write_sfp() can override the transfer length with a user-supplied\nvalue:\n\n\tif (len == 1)\n\t\topt |= BIT_0;\n\tif (opt \u0026 BIT_0)\n\t\tlen = *sfp;\n\n*sfp is the first byte of the (user-controlled) payload, so len can grow\nup to 255. The device then DMA-reads len bytes from the 256-byte pool\nbuffer. Since only a small prefix was written\n(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU\nstatus register), the hardware reads past the initialized region and\nwrites up to ~219 bytes of stale DMA-pool heap memory to the device\nflash.\n\nAllocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers\nso any bytes beyond the initialized data are zero rather than stale heap\ncontents."
}
],
"providerMetadata": {
"dateUpdated": "2026-10-19T08:53:58.579Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/a476377a66897549dd49bee319f4df66623417b7"
},
{
"url": "https://git.kernel.org/stable/c/09703bc7c0be3a7a155b0ff5f21f6765ba3f519c"
},
{
"url": "https://git.kernel.org/stable/c/97c45c75f5cdec96b1a4fba8b1d55d0dd01af1e8"
},
{
"url": "https://git.kernel.org/stable/c/84bde5ce4038d9ad811e5c994305bbfcbd7a9f79"
},
{
"url": "https://git.kernel.org/stable/c/581590f560b74399151b3cbc88574424c2f3d2dc"
},
{
"url": "https://git.kernel.org/stable/c/b157256c28086c434afd70cc78bf9b4d8caf1276"
},
{
"url": "https://git.kernel.org/stable/c/a5501c42256235523c4dddf799f032dfbf4f4c77"
},
{
"url": "https://git.kernel.org/stable/c/b47d4a1547d9ef21b2e9d1a739fe2204d4be05dc"
}
],
"title": "scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-89865",
"datePublished": "2026-09-16T10:31:35.758Z",
"dateReserved": "2026-09-11T19:38:34.771Z",
"dateUpdated": "2026-10-19T08:53:58.579Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-89865",
"date": "2026-11-16",
"epss": "0.00216",
"percentile": "0.1217"
},
"microsoft_vex": {
"current_release_date": "2026-10-21T18:41:07.000Z",
"cve": "CVE-2026-89865",
"id": "msrc_CVE-2026-89865",
"initial_release_date": "2026-09-17T01:17:01.000Z",
"product_status:fixed": "1",
"product_status:known_affected": "2",
"product_status:under_investigation": "1",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers",
"url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-89865.json",
"version": "6"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/scsi/qla2xxx/qla_bsg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "a476377a66897549dd49bee319f4df66623417b7",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "09703bc7c0be3a7a155b0ff5f21f6765ba3f519c",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "97c45c75f5cdec96b1a4fba8b1d55d0dd01af1e8",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "84bde5ce4038d9ad811e5c994305bbfcbd7a9f79",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "581590f560b74399151b3cbc88574424c2f3d2dc",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "b157256c28086c434afd70cc78bf9b4d8caf1276",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "a5501c42256235523c4dddf799f032dfbf4f4c77",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
},
{
"lessThan": "b47d4a1547d9ef21b2e9d1a739fe2204d4be05dc",
"status": "affected",
"version": "697a4bc69159c3396035b0506ffa55c4b2d0b1f4",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/scsi/qla2xxx/qla_bsg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.2"
},
{
"lessThan": "3.2",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.270",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.110",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.51",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers\n\nThe FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE\n(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not\nzero the allocation. They initialize only a few leading bytes before\nhanding the buffer to qla2x00_write_sfp().\n\nqla2x00_write_sfp() can override the transfer length with a user-supplied\nvalue:\n\n\tif (len == 1)\n\t\topt |= BIT_0;\n\tif (opt \u0026 BIT_0)\n\t\tlen = *sfp;\n\n*sfp is the first byte of the (user-controlled) payload, so len can grow\nup to 255. The device then DMA-reads len bytes from the 256-byte pool\nbuffer. Since only a small prefix was written\n(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU\nstatus register), the hardware reads past the initialized region and\nwrites up to ~219 bytes of stale DMA-pool heap memory to the device\nflash.\n\nAllocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers\nso any bytes beyond the initialized data are zero rather than stale heap\ncontents."
}
],
"id": "CVE-2026-89865",
"lastModified": "2026-10-19T09:18:31.147",
"metrics": {},
"published": "2026-09-16T11:16:54.610",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/09703bc7c0be3a7a155b0ff5f21f6765ba3f519c"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/581590f560b74399151b3cbc88574424c2f3d2dc"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/84bde5ce4038d9ad811e5c994305bbfcbd7a9f79"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/97c45c75f5cdec96b1a4fba8b1d55d0dd01af1e8"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/a476377a66897549dd49bee319f4df66623417b7"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/a5501c42256235523c4dddf799f032dfbf4f4c77"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b157256c28086c434afd70cc78bf9b4d8caf1276"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b47d4a1547d9ef21b2e9d1a739fe2204d4be05dc"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-06T01:25:11+00:00",
"cve": "CVE-2026-89865",
"id": "CVE-2026-89865",
"initial_release_date": "2026-09-16T00:00:00+00:00",
"product_status:known_affected": "203",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-89865.json",
"version": "3"
},
"suse_vex": {
"aggregate_severity": "low",
"current_release_date": "2026-11-14T01:31:01Z",
"cve": "CVE-2026-89865",
"id": "CVE-2026-89865",
"initial_release_date": "2026-09-17T16:36:37Z",
"product_status:known_affected": "669",
"product_status:known_not_affected": "4",
"product_status:recommended": "340",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-89865",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-89865.json",
"version": "14"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…