CVE-2026-72130 (GCVE-0-2026-72130)
Vulnerability from cvelistv5 – Published: 2026-08-15 05:53 – Updated: 2026-10-30 12:28
VLAI
EPSS
VEX
Title
nvmet-auth: reject short AUTH_RECEIVE buffers
Summary
In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: reject short AUTH_RECEIVE buffers
nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length
after checking only that it is nonzero and matches the transfer length.
In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF
initiator reach the fixed-size DH-HMAC-CHAP response builders with a
kmalloc() buffer shorter than the response, so nvmet_auth_success1() and
nvmet_auth_failure1() write past the allocation; both only WARN_ON the
short length and then format the message anyway.
Impact: A remote NVMe-oF initiator with access to an auth-enabled target
can trigger a 16-byte heap out-of-bounds write via a one-byte
AUTH_RECEIVE allocation length.
Compute the minimum response length for the current DH-HMAC-CHAP step in
nvmet_auth_receive_data_len() and report a zero data length when the
host-supplied allocation length is shorter, so the existing zero-length
check in nvmet_execute_auth_receive() rejects the command before any
builder runs. The SUCCESS1 minimum is sizeof(struct
nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the
response hash is written into the rval[] flexible-array tail, so the
minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its
existing variable-length guard in nvmet_auth_challenge().
This is reachable only when in-band DH-HMAC-CHAP authentication is
configured on the target.
Severity
9.8 (Critical)
SSVC
Exploitation: none
Automatable: yes
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-16 18:42 UTC
Assigner
References
6 references
Impacted products
2 products
| Vendor | Product | Version | |
|---|---|---|---|
| Linux | Linux |
Affected:
db1312dd95488b5e6ff362ff66fcf953a46b1821 , < ecdb6332fe59ddf18aad758a4926e3d483f4860a
(git)
Affected: db1312dd95488b5e6ff362ff66fcf953a46b1821 , < 584d7d14d9b40b080b1195cec83de86ade63343e (git) Affected: db1312dd95488b5e6ff362ff66fcf953a46b1821 , < 80bf7b7f676e3987bbe06af3c359bd56ac91a5a9 (git) Affected: db1312dd95488b5e6ff362ff66fcf953a46b1821 , < 2eaa3ad450141cfcf187bb43cb8335eb336b5f87 (git) Affected: db1312dd95488b5e6ff362ff66fcf953a46b1821 , < bc111698b46e43eddd8664cceaa621cd559e99a0 (git) Affected: db1312dd95488b5e6ff362ff66fcf953a46b1821 , < 779575bc35c687697ba69e904f2cd22e60112534 (git) |
|
| Linux | Linux |
Affected:
6.0
Unaffected: 0 , < 6.0 (semver) Unaffected: 6.1.191 , ≤ 6.1.* (semver) Unaffected: 6.6.160 , ≤ 6.6.* (semver) Unaffected: 6.12.101 , ≤ 6.12.* (semver) Unaffected: 6.18.40 , ≤ 6.18.* (semver) Unaffected: 7.1.5 , ≤ 7.1.* (semver) Unaffected: 7.2 , ≤ * (original_commit_for_fix) |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-72130",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T18:42:34.388225Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T18:44:58.498Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "ecdb6332fe59ddf18aad758a4926e3d483f4860a",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "584d7d14d9b40b080b1195cec83de86ade63343e",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "80bf7b7f676e3987bbe06af3c359bd56ac91a5a9",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "2eaa3ad450141cfcf187bb43cb8335eb336b5f87",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "bc111698b46e43eddd8664cceaa621cd559e99a0",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "779575bc35c687697ba69e904f2cd22e60112534",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.0"
},
{
"lessThan": "6.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.191",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.160",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.101",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.40",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.191",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.160",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.101",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.40",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1.5",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2",
"versionStartIncluding": "6.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvmet-auth: reject short AUTH_RECEIVE buffers\n\nnvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length\nafter checking only that it is nonzero and matches the transfer length.\nIn the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF\ninitiator reach the fixed-size DH-HMAC-CHAP response builders with a\nkmalloc() buffer shorter than the response, so nvmet_auth_success1() and\nnvmet_auth_failure1() write past the allocation; both only WARN_ON the\nshort length and then format the message anyway.\n\nImpact: A remote NVMe-oF initiator with access to an auth-enabled target\ncan trigger a 16-byte heap out-of-bounds write via a one-byte\nAUTH_RECEIVE allocation length.\n\nCompute the minimum response length for the current DH-HMAC-CHAP step in\nnvmet_auth_receive_data_len() and report a zero data length when the\nhost-supplied allocation length is shorter, so the existing zero-length\ncheck in nvmet_execute_auth_receive() rejects the command before any\nbuilder runs. The SUCCESS1 minimum is sizeof(struct\nnvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the\nresponse hash is written into the rval[] flexible-array tail, so the\nminimum is state dependent rather than a flat sizeof. CHALLENGE keeps its\nexisting variable-length guard in nvmet_auth_challenge().\n\nThis is reachable only when in-band DH-HMAC-CHAP authentication is\nconfigured on the target."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The bug is in nvmet DH-HMAC-CHAP AUTH_RECEIVE handling reached by remote NVMe-oF initiators over network transports (nvmet-tcp/RDMA/FC); malicious allocation length arrives in a Fabrics command capsule from the network.\nAC:L - Once an auth-enabled target is reachable, the attacker fully controls AUTH_RECEIVE allocation length and can reliably reach vulnerable states (e.g. default NEGOTIATE branch or FAILURE1) without conditions beyond their control.\nPR:N - Exploitation occurs on the pre-authentication DH-HMAC-CHAP handshake before credentials are verified; no Linux privileges on the target are required, only network access to an auth-configured NVMe-oF target port.\nUI:N - No victim user action is required beyond the administrator having already deployed an NVMe-oF target; exploitation is driven entirely by attacker-sent Fabrics authentication commands.\nS:U - Impact is kernel heap memory corruption within the NVMe target subsystem on the same host; it does not cross a VM/hypervisor or IOMMU security boundary by itself.\nC:H - A controlled heap out-of-bounds write (up to 16 bytes plus optional HMAC tail in SUCCESS1) can corrupt adjacent kmalloc objects and be leveraged for kernel information disclosure, per memory-corruption guidance.\nI:H - The vulnerability is a heap out-of-bounds write in kernel context; such corruption is exploitable for arbitrary memory modification and potential code execution, not merely a bounded logic error.\nA:H - Heap corruption can cause kernel oops/panic, and the FAILURE1 AUTH_RECEIVE completion path calls nvmet_ctrl_fatal_error(), taking down the NVMe controller and denying service to connected initiators."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T12:28:49.087Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/ecdb6332fe59ddf18aad758a4926e3d483f4860a"
},
{
"url": "https://git.kernel.org/stable/c/584d7d14d9b40b080b1195cec83de86ade63343e"
},
{
"url": "https://git.kernel.org/stable/c/80bf7b7f676e3987bbe06af3c359bd56ac91a5a9"
},
{
"url": "https://git.kernel.org/stable/c/2eaa3ad450141cfcf187bb43cb8335eb336b5f87"
},
{
"url": "https://git.kernel.org/stable/c/bc111698b46e43eddd8664cceaa621cd559e99a0"
},
{
"url": "https://git.kernel.org/stable/c/779575bc35c687697ba69e904f2cd22e60112534"
}
],
"title": "nvmet-auth: reject short AUTH_RECEIVE buffers",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-72130",
"datePublished": "2026-08-15T05:53:06.604Z",
"dateReserved": "2026-08-09T03:40:39.907Z",
"dateUpdated": "2026-10-30T12:28:49.087Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-72130",
"date": "2026-11-17",
"epss": "0.00803",
"percentile": "0.57315"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "ecdb6332fe59ddf18aad758a4926e3d483f4860a",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "584d7d14d9b40b080b1195cec83de86ade63343e",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "80bf7b7f676e3987bbe06af3c359bd56ac91a5a9",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "2eaa3ad450141cfcf187bb43cb8335eb336b5f87",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "bc111698b46e43eddd8664cceaa621cd559e99a0",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "779575bc35c687697ba69e904f2cd22e60112534",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.0"
},
{
"lessThan": "6.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.191",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.160",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.101",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.40",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvmet-auth: reject short AUTH_RECEIVE buffers\n\nnvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length\nafter checking only that it is nonzero and matches the transfer length.\nIn the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF\ninitiator reach the fixed-size DH-HMAC-CHAP response builders with a\nkmalloc() buffer shorter than the response, so nvmet_auth_success1() and\nnvmet_auth_failure1() write past the allocation; both only WARN_ON the\nshort length and then format the message anyway.\n\nImpact: A remote NVMe-oF initiator with access to an auth-enabled target\ncan trigger a 16-byte heap out-of-bounds write via a one-byte\nAUTH_RECEIVE allocation length.\n\nCompute the minimum response length for the current DH-HMAC-CHAP step in\nnvmet_auth_receive_data_len() and report a zero data length when the\nhost-supplied allocation length is shorter, so the existing zero-length\ncheck in nvmet_execute_auth_receive() rejects the command before any\nbuilder runs. The SUCCESS1 minimum is sizeof(struct\nnvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the\nresponse hash is written into the rval[] flexible-array tail, so the\nminimum is state dependent rather than a flat sizeof. CHALLENGE keeps its\nexisting variable-length guard in nvmet_auth_challenge().\n\nThis is reachable only when in-band DH-HMAC-CHAP authentication is\nconfigured on the target."
}
],
"id": "CVE-2026-72130",
"lastModified": "2026-10-30T13:19:47.237",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 5.9,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-72130",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T18:42:34.388225Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-08-15T06:21:30.453",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/2eaa3ad450141cfcf187bb43cb8335eb336b5f87"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/584d7d14d9b40b080b1195cec83de86ade63343e"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/779575bc35c687697ba69e904f2cd22e60112534"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/80bf7b7f676e3987bbe06af3c359bd56ac91a5a9"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/bc111698b46e43eddd8664cceaa621cd559e99a0"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/ecdb6332fe59ddf18aad758a4926e3d483f4860a"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
},
"redhat_vex": {
"aggregate_severity": "Important",
"current_release_date": "2026-11-04T23:13:04+00:00",
"cve": "CVE-2026-72130",
"id": "CVE-2026-72130",
"initial_release_date": "2026-08-15T00:00:00+00:00",
"product_status:fixed": "1658",
"product_status:known_affected": "22",
"product_status:known_not_affected": "90",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: nvmet-auth: reject short AUTH_RECEIVE buffers",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-72130.json",
"version": "3"
},
"suse_vex": {
"aggregate_severity": "moderate",
"current_release_date": "2026-11-14T02:26:01Z",
"cve": "CVE-2026-72130",
"id": "CVE-2026-72130",
"initial_release_date": "2026-08-18T16:54:52Z",
"product_status:known_affected": "429",
"product_status:known_not_affected": "296",
"product_status:recommended": "423",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-72130",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-72130.json",
"version": "16"
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-72130",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T18:42:34.388225Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T18:42:34.910Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "ecdb6332fe59ddf18aad758a4926e3d483f4860a",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "584d7d14d9b40b080b1195cec83de86ade63343e",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "80bf7b7f676e3987bbe06af3c359bd56ac91a5a9",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "2eaa3ad450141cfcf187bb43cb8335eb336b5f87",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "bc111698b46e43eddd8664cceaa621cd559e99a0",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
},
{
"lessThan": "779575bc35c687697ba69e904f2cd22e60112534",
"status": "affected",
"version": "db1312dd95488b5e6ff362ff66fcf953a46b1821",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/fabrics-cmd-auth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.0"
},
{
"lessThan": "6.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.191",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.160",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.101",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.40",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.191",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.160",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.101",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.40",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1.5",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2",
"versionStartIncluding": "6.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvmet-auth: reject short AUTH_RECEIVE buffers\n\nnvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length\nafter checking only that it is nonzero and matches the transfer length.\nIn the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF\ninitiator reach the fixed-size DH-HMAC-CHAP response builders with a\nkmalloc() buffer shorter than the response, so nvmet_auth_success1() and\nnvmet_auth_failure1() write past the allocation; both only WARN_ON the\nshort length and then format the message anyway.\n\nImpact: A remote NVMe-oF initiator with access to an auth-enabled target\ncan trigger a 16-byte heap out-of-bounds write via a one-byte\nAUTH_RECEIVE allocation length.\n\nCompute the minimum response length for the current DH-HMAC-CHAP step in\nnvmet_auth_receive_data_len() and report a zero data length when the\nhost-supplied allocation length is shorter, so the existing zero-length\ncheck in nvmet_execute_auth_receive() rejects the command before any\nbuilder runs. The SUCCESS1 minimum is sizeof(struct\nnvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the\nresponse hash is written into the rval[] flexible-array tail, so the\nminimum is state dependent rather than a flat sizeof. CHALLENGE keeps its\nexisting variable-length guard in nvmet_auth_challenge().\n\nThis is reachable only when in-band DH-HMAC-CHAP authentication is\nconfigured on the target."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The bug is in nvmet DH-HMAC-CHAP AUTH_RECEIVE handling reached by remote NVMe-oF initiators over network transports (nvmet-tcp/RDMA/FC); malicious allocation length arrives in a Fabrics command capsule from the network.\nAC:L - Once an auth-enabled target is reachable, the attacker fully controls AUTH_RECEIVE allocation length and can reliably reach vulnerable states (e.g. default NEGOTIATE branch or FAILURE1) without conditions beyond their control.\nPR:N - Exploitation occurs on the pre-authentication DH-HMAC-CHAP handshake before credentials are verified; no Linux privileges on the target are required, only network access to an auth-configured NVMe-oF target port.\nUI:N - No victim user action is required beyond the administrator having already deployed an NVMe-oF target; exploitation is driven entirely by attacker-sent Fabrics authentication commands.\nS:U - Impact is kernel heap memory corruption within the NVMe target subsystem on the same host; it does not cross a VM/hypervisor or IOMMU security boundary by itself.\nC:H - A controlled heap out-of-bounds write (up to 16 bytes plus optional HMAC tail in SUCCESS1) can corrupt adjacent kmalloc objects and be leveraged for kernel information disclosure, per memory-corruption guidance.\nI:H - The vulnerability is a heap out-of-bounds write in kernel context; such corruption is exploitable for arbitrary memory modification and potential code execution, not merely a bounded logic error.\nA:H - Heap corruption can cause kernel oops/panic, and the FAILURE1 AUTH_RECEIVE completion path calls nvmet_ctrl_fatal_error(), taking down the NVMe controller and denying service to connected initiators."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T12:28:49.087Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/ecdb6332fe59ddf18aad758a4926e3d483f4860a"
},
{
"url": "https://git.kernel.org/stable/c/584d7d14d9b40b080b1195cec83de86ade63343e"
},
{
"url": "https://git.kernel.org/stable/c/80bf7b7f676e3987bbe06af3c359bd56ac91a5a9"
},
{
"url": "https://git.kernel.org/stable/c/2eaa3ad450141cfcf187bb43cb8335eb336b5f87"
},
{
"url": "https://git.kernel.org/stable/c/bc111698b46e43eddd8664cceaa621cd559e99a0"
},
{
"url": "https://git.kernel.org/stable/c/779575bc35c687697ba69e904f2cd22e60112534"
}
],
"title": "nvmet-auth: reject short AUTH_RECEIVE buffers",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-72130",
"datePublished": "2026-08-15T05:53:06.604Z",
"dateReserved": "2026-08-09T03:40:39.907Z",
"dateUpdated": "2026-10-30T12:28:49.087Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…