CVE-2026-43250 (GCVE-0-2026-43250)

Vulnerability from cvelistv5 – Published: 2026-05-06 11:28 – Updated: 2026-10-30 12:25
VLAI
Title
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
Summary
In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted).
Impacted products
Vendor Product Version
Linux Linux Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < 1497998749600411d75e60a44f7e572b2348bd9a (git)
Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < aad97c92119cb85db105ddda4a44c86cc0748e8c (git)
Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < 1b72b834511d17f4d069d512f78671f3f210a2f1 (git)
Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < f4fbf2d4750d12ac8525d2efac1016fa0d84d4ec (git)
Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < e74c436f8568af1c60942469d0a2300b3ada3857 (git)
Affected: aa69a8093ff985873cb44fe1157bd6db29a20fe4 , < cea2a1257a3b5ea3e769a445b34af13e6aa5a123 (git)
Create a notification for this product.
Linux Linux Affected: 2.6.29
Unaffected: 0 , < 2.6.29 (semver)
Unaffected: 6.1.191 , ≤ 6.1.* (semver)
Unaffected: 6.6.160 , ≤ 6.6.* (semver)
Unaffected: 6.12.75 , ≤ 6.12.* (semver)
Unaffected: 6.18.16 , ≤ 6.18.* (semver)
Unaffected: 6.19.6 , ≤ 6.19.* (semver)
Unaffected: 7.0 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/chipidea/udc.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "1497998749600411d75e60a44f7e572b2348bd9a",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            },
            {
              "lessThan": "aad97c92119cb85db105ddda4a44c86cc0748e8c",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            },
            {
              "lessThan": "1b72b834511d17f4d069d512f78671f3f210a2f1",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            },
            {
              "lessThan": "f4fbf2d4750d12ac8525d2efac1016fa0d84d4ec",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            },
            {
              "lessThan": "e74c436f8568af1c60942469d0a2300b3ada3857",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            },
            {
              "lessThan": "cea2a1257a3b5ea3e769a445b34af13e6aa5a123",
              "status": "affected",
              "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/chipidea/udc.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.29"
            },
            {
              "lessThan": "2.6.29",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.191",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.160",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.75",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.16",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.19.*",
              "status": "unaffected",
              "version": "6.19.6",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.191",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.160",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.75",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.16",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19.6",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0",
                  "versionStartIncluding": "2.6.29",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()\n\nThe ChipIdea UDC driver can encounter \"not page aligned sg buffer\"\nerrors when a USB device is reconnected after being disconnected\nduring an active transfer. This occurs because _ep_nuke() returns\nrequests to the gadget layer without properly unmapping DMA buffers\nor cleaning up scatter-gather bounce buffers.\n\nRoot cause:\nWhen a disconnect happens during a multi-segment DMA transfer, the\nrequest\u0027s num_mapped_sgs field and sgt.sgl pointer remain set with\nstale values. The request is returned to the gadget driver with status\n-ESHUTDOWN but still has active DMA state. If the gadget driver reuses\nthis request on reconnect without reinitializing it, the stale DMA\nstate causes _hardware_enqueue() to skip DMA mapping (seeing non-zero\nnum_mapped_sgs) and attempt to use freed/invalid DMA addresses,\nleading to alignment errors and potential memory corruption.\n\nThe normal completion path via _hardware_dequeue() properly calls\nusb_gadget_unmap_request_by_dev() and sglist_do_debounce() before\nreturning the request. The _ep_nuke() path must do the same cleanup\nto ensure requests are returned in a clean, reusable state.\n\nFix:\nAdd DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror\nthe cleanup sequence in _hardware_dequeue():\n- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set\n- Call sglist_do_debounce() with copy=false if bounce buffer exists\n\nThis ensures that when requests are returned due to endpoint shutdown,\nthey don\u0027t retain stale DMA mappings. The \u0027false\u0027 parameter to\nsglist_do_debounce() prevents copying data back (appropriate for\nshutdown path where transfer was aborted)."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-30T12:25:18.775Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/1497998749600411d75e60a44f7e572b2348bd9a"
        },
        {
          "url": "https://git.kernel.org/stable/c/aad97c92119cb85db105ddda4a44c86cc0748e8c"
        },
        {
          "url": "https://git.kernel.org/stable/c/1b72b834511d17f4d069d512f78671f3f210a2f1"
        },
        {
          "url": "https://git.kernel.org/stable/c/f4fbf2d4750d12ac8525d2efac1016fa0d84d4ec"
        },
        {
          "url": "https://git.kernel.org/stable/c/e74c436f8568af1c60942469d0a2300b3ada3857"
        },
        {
          "url": "https://git.kernel.org/stable/c/cea2a1257a3b5ea3e769a445b34af13e6aa5a123"
        }
      ],
      "title": "usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-43250",
    "datePublished": "2026-05-06T11:28:41.158Z",
    "dateReserved": "2026-05-01T14:12:55.996Z",
    "dateUpdated": "2026-10-30T12:25:18.775Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-43250",
      "date": "2026-11-16",
      "epss": "0.00164",
      "percentile": "0.05641"
    },
    "microsoft_vex": {
      "current_release_date": "2026-11-05T15:10:06.000Z",
      "cve": "CVE-2026-43250",
      "id": "msrc_CVE-2026-43250",
      "initial_release_date": "2026-05-07T01:08:18.000Z",
      "product_status:known_affected": "12",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()",
      "url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-43250.json",
      "version": "16"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/usb/chipidea/udc.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "1497998749600411d75e60a44f7e572b2348bd9a",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "aad97c92119cb85db105ddda4a44c86cc0748e8c",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "1b72b834511d17f4d069d512f78671f3f210a2f1",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "f4fbf2d4750d12ac8525d2efac1016fa0d84d4ec",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e74c436f8568af1c60942469d0a2300b3ada3857",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "cea2a1257a3b5ea3e769a445b34af13e6aa5a123",
                    "status": "affected",
                    "version": "aa69a8093ff985873cb44fe1157bd6db29a20fe4",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/usb/chipidea/udc.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "2.6.29"
                  },
                  {
                    "lessThan": "2.6.29",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.1.*",
                    "status": "unaffected",
                    "version": "6.1.191",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.6.*",
                    "status": "unaffected",
                    "version": "6.6.160",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.75",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.16",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.19.*",
                    "status": "unaffected",
                    "version": "6.19.6",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.0",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "3C0B1026-23F7-4F83-B19F-153326AAEC72",
                    "versionEndExcluding": "6.12.75",
                    "versionStartIncluding": "2.6.29",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "B4B8CDA9-BADF-4CF5-8B3B-702DE8EEA40B",
                    "versionEndExcluding": "6.18.16",
                    "versionStartIncluding": "6.13",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "373EEEDA-FAA1-4FB4-B6ED-DB4DD99DBE67",
                    "versionEndExcluding": "6.19.6",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()\n\nThe ChipIdea UDC driver can encounter \"not page aligned sg buffer\"\nerrors when a USB device is reconnected after being disconnected\nduring an active transfer. This occurs because _ep_nuke() returns\nrequests to the gadget layer without properly unmapping DMA buffers\nor cleaning up scatter-gather bounce buffers.\n\nRoot cause:\nWhen a disconnect happens during a multi-segment DMA transfer, the\nrequest\u0027s num_mapped_sgs field and sgt.sgl pointer remain set with\nstale values. The request is returned to the gadget driver with status\n-ESHUTDOWN but still has active DMA state. If the gadget driver reuses\nthis request on reconnect without reinitializing it, the stale DMA\nstate causes _hardware_enqueue() to skip DMA mapping (seeing non-zero\nnum_mapped_sgs) and attempt to use freed/invalid DMA addresses,\nleading to alignment errors and potential memory corruption.\n\nThe normal completion path via _hardware_dequeue() properly calls\nusb_gadget_unmap_request_by_dev() and sglist_do_debounce() before\nreturning the request. The _ep_nuke() path must do the same cleanup\nto ensure requests are returned in a clean, reusable state.\n\nFix:\nAdd DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror\nthe cleanup sequence in _hardware_dequeue():\n- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set\n- Call sglist_do_debounce() with copy=false if bounce buffer exists\n\nThis ensures that when requests are returned due to endpoint shutdown,\nthey don\u0027t retain stale DMA mappings. The \u0027false\u0027 parameter to\nsglist_do_debounce() prevents copying data back (appropriate for\nshutdown path where transfer was aborted)."
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\nusb: chipidea: udc: corrige la limpieza de DMA y SG en _ep_nuke()\n\nEl controlador UDC de ChipIdea puede encontrar errores de \u2019b\u00fafer sg no alineado a p\u00e1gina\u2019 cuando un dispositivo USB se reconecta despu\u00e9s de ser desconectado durante una transferencia activa. Esto ocurre porque _ep_nuke() devuelve solicitudes a la capa de gadget sin desmapear correctamente los b\u00faferes DMA o limpiar los b\u00faferes de rebote scatter-gather.\n\nCausa ra\u00edz:\nCuando ocurre una desconexi\u00f3n durante una transferencia DMA multisegmento, el campo num_mapped_sgs de la solicitud y el puntero sgt.sgl permanecen configurados con valores obsoletos. La solicitud es devuelta al controlador de gadget con estado -ESHUTDOWN pero a\u00fan tiene un estado DMA activo. Si el controlador de gadget reutiliza esta solicitud al reconectar sin reinicializarla, el estado DMA obsoleto hace que _hardware_enqueue() omita el mapeo DMA (al ver num_mapped_sgs distinto de cero) e intente usar direcciones DMA liberadas/inv\u00e1lidas, lo que lleva a errores de alineaci\u00f3n y potencial corrupci\u00f3n de memoria.\n\nLa ruta de finalizaci\u00f3n normal a trav\u00e9s de _hardware_dequeue() llama correctamente a usb_gadget_unmap_request_by_dev() y sglist_do_debounce() antes de devolver la solicitud. La ruta _ep_nuke() debe realizar la misma limpieza para asegurar que las solicitudes se devuelvan en un estado limpio y reutilizable.\n\nSoluci\u00f3n:\nA\u00f1adir el desmapeo DMA y la limpieza del b\u00fafer de rebote a _ep_nuke() para reflejar la secuencia de limpieza en _hardware_dequeue():\n- Llamar a usb_gadget_unmap_request_by_dev() si num_mapped_sgs est\u00e1 configurado\n- Llamar a sglist_do_debounce() con copy=false si existe un b\u00fafer de rebote\n\nEsto asegura que cuando las solicitudes son devueltas debido al apagado del endpoint, no retengan mapeos DMA obsoletos. El par\u00e1metro \u2019false\u2019 de sglist_do_debounce() evita copiar datos de vuelta (apropiado para la ruta de apagado donde la transferencia fue abortada)."
          }
        ],
        "id": "CVE-2026-43250",
        "lastModified": "2026-11-11T20:10:00.273",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 7.8,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "HIGH",
                "integrityImpact": "HIGH",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 5.9,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2026-05-06T12:16:45.620",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/1497998749600411d75e60a44f7e572b2348bd9a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/1b72b834511d17f4d069d512f78671f3f210a2f1"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/aad97c92119cb85db105ddda4a44c86cc0748e8c"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/cea2a1257a3b5ea3e769a445b34af13e6aa5a123"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/e74c436f8568af1c60942469d0a2300b3ada3857"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/f4fbf2d4750d12ac8525d2efac1016fa0d84d4ec"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Modified",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-787"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "None",
      "current_release_date": "2026-11-07T04:43:08+00:00",
      "cve": "CVE-2026-43250",
      "id": "CVE-2026-43250",
      "initial_release_date": "2026-05-06T00:00:00+00:00",
      "product_status:known_not_affected": "200",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-43250.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-10-21T23:51:53Z",
      "cve": "CVE-2026-43250",
      "id": "CVE-2026-43250",
      "initial_release_date": "2026-05-07T02:16:45Z",
      "product_status:known_affected": "372",
      "product_status:known_not_affected": "17",
      "product_status:recommended": "203",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-43250",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-43250.json",
      "version": "8"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…