CVE-2026-31448 (GCVE-0-2026-31448)
Vulnerability from cvelistv5 – Published: 2026-04-22 13:53 – Updated: 2026-11-10 12:44
VLAI
EPSS
VEX
Title
ext4: avoid infinite loops caused by residual data
Summary
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline]
Severity
9.4 (Critical)
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-16 15:09 UTC
CWE
- CWE-835 - Loop with Unreachable Exit Condition ('Infinite Loop')
Assigner
References
9 references
Impacted products
17 products
| Vendor | Product | Version | |
|---|---|---|---|
| Linux | Linux |
Affected:
315054f023d28ee64f308adf8b5737831541776b , < c66545e83a802c3851d9be27a41c0479dd29ff0c
(git)
Affected: 315054f023d28ee64f308adf8b5737831541776b , < ecc50bfca9b5c2ee6aeef998181689b80477367b (git) Affected: 315054f023d28ee64f308adf8b5737831541776b , < 3a7667595bcad84da53fc156a418e110267c3412 (git) Affected: 315054f023d28ee64f308adf8b5737831541776b , < 416c86f30f91b4fb2642ef6b102596ca898f41a5 (git) Affected: 315054f023d28ee64f308adf8b5737831541776b , < 64f425b06b3bea9abc8977fd3982779b3ad070c9 (git) Affected: 315054f023d28ee64f308adf8b5737831541776b , < 5422fe71d26d42af6c454ca9527faaad4e677d6c (git) |
|
| Linux | Linux |
Affected:
2.6.22
Unaffected: 0 , < 2.6.22 (semver) Unaffected: 6.1.168 , ≤ 6.1.* (semver) Unaffected: 6.6.131 , ≤ 6.6.* (semver) Unaffected: 6.12.80 , ≤ 6.12.* (semver) Unaffected: 6.18.21 , ≤ 6.18.* (semver) Unaffected: 6.19.11 , ≤ 6.19.* (semver) Unaffected: 7.0 , ≤ * (original_commit_for_fix) |
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.6 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.5 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.7 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.6 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.5 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.7 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.6 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.5 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.7 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.6 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.5 , < *
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.7 , < *
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.6 , < *
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.5 , < *
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.7 , < *
(custom)
|
{
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-10T12:44:23.293Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}
],
"x_adpType": "supplier"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-31448",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:09:25.858485Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-835",
"description": "CWE-835 Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-19T18:35:48.686Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "c66545e83a802c3851d9be27a41c0479dd29ff0c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "ecc50bfca9b5c2ee6aeef998181689b80477367b",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "3a7667595bcad84da53fc156a418e110267c3412",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "416c86f30f91b4fb2642ef6b102596ca898f41a5",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "64f425b06b3bea9abc8977fd3982779b3ad070c9",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "5422fe71d26d42af6c454ca9527faaad4e677d6c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.22"
},
{
"lessThan": "2.6.22",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.131",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.80",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.21",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.131",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.80",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.21",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.11",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "2.6.22",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\next4: avoid infinite loops caused by residual data\n\nOn the mkdir/mknod path, when mapping logical blocks to physical blocks,\nif inserting a new extent into the extent tree fails (in this example,\nbecause the file system disabled the huge file feature when marking the\ninode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to\nreclaim the physical block without deleting the corresponding data in\nthe extent tree. This causes subsequent mkdir operations to reference\nthe previously reclaimed physical block number again, even though this\nphysical block is already being used by the xattr block. Therefore, a\nsituation arises where both the directory and xattr are using the same\nbuffer head block in memory simultaneously.\n\nThe above causes ext4_xattr_block_set() to enter an infinite loop about\n\"inserted\" and cannot release the inode lock, ultimately leading to the\n143s blocking problem mentioned in [1].\n\nIf the metadata is corrupted, then trying to remove some extent space\ncan do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE\nwas passed, remove space wrongly update quota information.\nJan Kara suggests distinguishing between two cases:\n\n1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully\nconsistent and we must maintain its consistency including all the\naccounting. However these errors can happen only early before we\u0027ve\ninserted the extent into the extent tree. So current code works correctly\nfor this case.\n\n2) Some other error - this means metadata is corrupted. We should strive to\ndo as few modifications as possible to limit damage. So I\u0027d just skip\nfreeing of allocated blocks.\n\n[1]\nINFO: task syz.0.17:5995 blocked for more than 143 seconds.\nCall Trace:\n inode_lock_nested include/linux/fs.h:1073 [inline]\n __start_dirop fs/namei.c:2923 [inline]\n start_dirop fs/namei.c:2934 [inline]"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.4,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The vulnerable ext4 path is reachable through VFS mkdir/mknod/xattr operations, and the same operations can be driven remotely through in-kernel file servers such as ksmbd or nfsd on an ext4-backed writable export. A network-accessible writable share is a reasonable severe deployment scenario.\nAC:L - No race or probabilistic exploitation condition is required; once the affected ext4 state exists, the attacker can repeatedly drive the create/xattr sequence that reaches the stale extent mapping. The attacker controls the filesystem operations that trigger the hang.\nPR:N - In the most severe reasonable deployment, a guest/anonymous writable network export can expose the needed create operations without prior authentication. Locally, the same path only needs ordinary write permission on the directory, not kernel capabilities.\nUI:N - The attacker can trigger the vulnerable operations directly by issuing filesystem requests. No separate victim action is required in the network-export scenario.\nS:U - The impact remains within the Linux kernel/filesystem security authority. There is no VM escape, IOMMU bypass, or other cross-scope boundary crossing.\nC:L - The stale block aliasing can cause filesystem metadata/xattr contents to be interpreted through the wrong object, giving a plausible limited metadata disclosure risk. It is not a kernel memory arbitrary-read primitive.\nI:H - The bug creates a double-use physical block situation where directory and xattr metadata share the same buffer, allowing attacker-driven filesystem operations to corrupt security-relevant filesystem metadata. Given uncertainty about controllability of the aliased xattr block, the higher severity integrity value is selected.\nA:H - The observed failure is an infinite loop while holding inode locks, causing hung tasks for more than 143 seconds and repeatable filesystem denial of service. Kernel hung-task/deadlock conditions are high availability impact."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:22:38.829Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/c66545e83a802c3851d9be27a41c0479dd29ff0c"
},
{
"url": "https://git.kernel.org/stable/c/ecc50bfca9b5c2ee6aeef998181689b80477367b"
},
{
"url": "https://git.kernel.org/stable/c/3a7667595bcad84da53fc156a418e110267c3412"
},
{
"url": "https://git.kernel.org/stable/c/416c86f30f91b4fb2642ef6b102596ca898f41a5"
},
{
"url": "https://git.kernel.org/stable/c/64f425b06b3bea9abc8977fd3982779b3ad070c9"
},
{
"url": "https://git.kernel.org/stable/c/5422fe71d26d42af6c454ca9527faaad4e677d6c"
}
],
"title": "ext4: avoid infinite loops caused by residual data",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31448",
"datePublished": "2026-04-22T13:53:44.129Z",
"dateReserved": "2026-03-09T15:48:24.091Z",
"dateUpdated": "2026-11-10T12:44:23.293Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-31448",
"date": "2026-11-16",
"epss": "0.00499",
"percentile": "0.43294"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "c66545e83a802c3851d9be27a41c0479dd29ff0c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "ecc50bfca9b5c2ee6aeef998181689b80477367b",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "3a7667595bcad84da53fc156a418e110267c3412",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "416c86f30f91b4fb2642ef6b102596ca898f41a5",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "64f425b06b3bea9abc8977fd3982779b3ad070c9",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "5422fe71d26d42af6c454ca9527faaad4e677d6c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.22"
},
{
"lessThan": "2.6.22",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.131",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.80",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.21",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "09A2CD65-1CD4-45BC-AB86-2A903D823B07",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "2.6.22.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "CE6ED4D4-0046-4573-BFA9-D64143B6A89F",
"versionEndExcluding": "6.6.131",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "97EB19EC-A11E-49C6-9D2F-6F6EC6CB98B6",
"versionEndExcluding": "6.12.80",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "ED39847A-3B46-4729-B7CA-B2C30B9FA8FE",
"versionEndExcluding": "6.18.21",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7",
"versionEndExcluding": "6.19.11",
"versionStartIncluding": "6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:-:*:*:*:*:*:*",
"matchCriteriaId": "7F7D6C66-3384-4ACC-9D08-C5A26B4FD004",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc4:*:*:*:*:*:*",
"matchCriteriaId": "6465E61D-0238-4ED3-B4CB-E3B93F4F324F",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc5:*:*:*:*:*:*",
"matchCriteriaId": "830B8340-2B8F-4F0A-8943-F4413411573C",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc6:*:*:*:*:*:*",
"matchCriteriaId": "D123AAFE-3F17-45C4-9382-BA392FD022C4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc7:*:*:*:*:*:*",
"matchCriteriaId": "E0C256E6-2691-4478-A51C-DE580A717AB9",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
"matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
"matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
"matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
"matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
"matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\next4: avoid infinite loops caused by residual data\n\nOn the mkdir/mknod path, when mapping logical blocks to physical blocks,\nif inserting a new extent into the extent tree fails (in this example,\nbecause the file system disabled the huge file feature when marking the\ninode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to\nreclaim the physical block without deleting the corresponding data in\nthe extent tree. This causes subsequent mkdir operations to reference\nthe previously reclaimed physical block number again, even though this\nphysical block is already being used by the xattr block. Therefore, a\nsituation arises where both the directory and xattr are using the same\nbuffer head block in memory simultaneously.\n\nThe above causes ext4_xattr_block_set() to enter an infinite loop about\n\"inserted\" and cannot release the inode lock, ultimately leading to the\n143s blocking problem mentioned in [1].\n\nIf the metadata is corrupted, then trying to remove some extent space\ncan do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE\nwas passed, remove space wrongly update quota information.\nJan Kara suggests distinguishing between two cases:\n\n1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully\nconsistent and we must maintain its consistency including all the\naccounting. However these errors can happen only early before we\u0027ve\ninserted the extent into the extent tree. So current code works correctly\nfor this case.\n\n2) Some other error - this means metadata is corrupted. We should strive to\ndo as few modifications as possible to limit damage. So I\u0027d just skip\nfreeing of allocated blocks.\n\n[1]\nINFO: task syz.0.17:5995 blocked for more than 143 seconds.\nCall Trace:\n inode_lock_nested include/linux/fs.h:1073 [inline]\n __start_dirop fs/namei.c:2923 [inline]\n start_dirop fs/namei.c:2934 [inline]"
},
{
"lang": "es",
"value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\next4: evitar bucles infinitos causados por datos residuales\n\nEn la ruta mkdir/mknod, al mapear bloques l\u00f3gicos a bloques f\u00edsicos, si la inserci\u00f3n de un nuevo extent en el \u00e1rbol de extents falla (en este ejemplo, porque el sistema de archivos deshabilit\u00f3 la caracter\u00edstica de archivos grandes al marcar el inodo como sucio), ext4_ext_map_blocks() solo llama a ext4_free_blocks() para reclamar el bloque f\u00edsico sin eliminar los datos correspondientes en el \u00e1rbol de extents. Esto hace que las operaciones mkdir posteriores referencien de nuevo el n\u00famero de bloque f\u00edsico previamente reclamado, aunque este bloque f\u00edsico ya est\u00e9 siendo utilizado por el bloque xattr. Por lo tanto, surge una situaci\u00f3n en la que tanto el directorio como xattr est\u00e1n utilizando el mismo bloque de cabecera de b\u00fafer en memoria simult\u00e1neamente.\n\nLo anterior hace que ext4_xattr_block_set() entre en un bucle infinito sobre \u2019inserted\u2019 y no pueda liberar el bloqueo del inodo, lo que finalmente lleva al problema de bloqueo de 143s mencionado en [1].\n\nSi los metadatos est\u00e1n corruptos, entonces intentar eliminar algo de espacio de extent puede causar a\u00fan m\u00e1s da\u00f1o. Tambi\u00e9n en caso de que se pasara EXT4_GET_BLOCKS_DELALLOC_RESERVE, la eliminaci\u00f3n de espacio actualiza err\u00f3neamente la informaci\u00f3n de cuota. Jan Kara sugiere distinguir entre dos casos:\n\n1) El error es ENOSPC o EDQUOT - en este caso el sistema de archivos es totalmente consistente y debemos mantener su consistencia incluyendo toda la contabilidad. Sin embargo, estos errores solo pueden ocurrir temprano antes de haber insertado el extent en el \u00e1rbol de extents. Por lo tanto, el c\u00f3digo actual funciona correctamente para este caso.\n\n2) Alg\u00fan otro error - esto significa que los metadatos est\u00e1n corruptos. Debemos esforzarnos por hacer la menor cantidad de modificaciones posible para limitar el da\u00f1o. As\u00ed que simplemente omitir\u00eda la liberaci\u00f3n de bloques asignados.\n\n[1]\nINFO: la tarea syz.0.17:5995 bloqueada durante m\u00e1s de 143 segundos.\nTraza de Llamada:\n inode_lock_nested include/linux/fs.h:1073 [inline]\n __start_dirop fs/namei.c:2923 [inline]\n start_dirop fs/namei.c:2934 [inline]"
}
],
"id": "CVE-2026-31448",
"lastModified": "2026-11-11T23:10:00.263",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.4,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "LOW",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 5.5,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-31448",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:09:25.858485Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-04-22T14:16:38.760",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/3a7667595bcad84da53fc156a418e110267c3412"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/416c86f30f91b4fb2642ef6b102596ca898f41a5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/5422fe71d26d42af6c454ca9527faaad4e677d6c"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/64f425b06b3bea9abc8977fd3982779b3ad070c9"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/c66545e83a802c3851d9be27a41c0479dd29ff0c"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/ecc50bfca9b5c2ee6aeef998181689b80477367b"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-835"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
},
{
"description": [
{
"lang": "en",
"value": "CWE-835"
}
],
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-07T04:17:28+00:00",
"cve": "CVE-2026-31448",
"id": "CVE-2026-31448",
"initial_release_date": "2026-04-22T00:00:00+00:00",
"product_status:known_affected": "186",
"product_status:known_not_affected": "14",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: ext4: avoid infinite loops caused by residual data",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-31448.json",
"version": "3"
},
"suse_vex": {
"aggregate_severity": "moderate",
"current_release_date": "2026-11-07T02:29:09Z",
"cve": "CVE-2026-31448",
"id": "CVE-2026-31448",
"initial_release_date": "2026-04-23T01:26:17Z",
"product_status:known_affected": "396",
"product_status:known_not_affected": "331",
"product_status:recommended": "310",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-31448",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-31448.json",
"version": "15"
},
"vulnrichment": {
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-10T12:44:23.293Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}
],
"x_adpType": "supplier"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-31448",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T15:09:25.858485Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-835",
"description": "CWE-835 Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T15:09:26.615Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "c66545e83a802c3851d9be27a41c0479dd29ff0c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "ecc50bfca9b5c2ee6aeef998181689b80477367b",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "3a7667595bcad84da53fc156a418e110267c3412",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "416c86f30f91b4fb2642ef6b102596ca898f41a5",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "64f425b06b3bea9abc8977fd3982779b3ad070c9",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
},
{
"lessThan": "5422fe71d26d42af6c454ca9527faaad4e677d6c",
"status": "affected",
"version": "315054f023d28ee64f308adf8b5737831541776b",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"fs/ext4/extents.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.22"
},
{
"lessThan": "2.6.22",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.131",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.80",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.21",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.131",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.80",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.21",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.11",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "2.6.22",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\next4: avoid infinite loops caused by residual data\n\nOn the mkdir/mknod path, when mapping logical blocks to physical blocks,\nif inserting a new extent into the extent tree fails (in this example,\nbecause the file system disabled the huge file feature when marking the\ninode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to\nreclaim the physical block without deleting the corresponding data in\nthe extent tree. This causes subsequent mkdir operations to reference\nthe previously reclaimed physical block number again, even though this\nphysical block is already being used by the xattr block. Therefore, a\nsituation arises where both the directory and xattr are using the same\nbuffer head block in memory simultaneously.\n\nThe above causes ext4_xattr_block_set() to enter an infinite loop about\n\"inserted\" and cannot release the inode lock, ultimately leading to the\n143s blocking problem mentioned in [1].\n\nIf the metadata is corrupted, then trying to remove some extent space\ncan do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE\nwas passed, remove space wrongly update quota information.\nJan Kara suggests distinguishing between two cases:\n\n1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully\nconsistent and we must maintain its consistency including all the\naccounting. However these errors can happen only early before we\u0027ve\ninserted the extent into the extent tree. So current code works correctly\nfor this case.\n\n2) Some other error - this means metadata is corrupted. We should strive to\ndo as few modifications as possible to limit damage. So I\u0027d just skip\nfreeing of allocated blocks.\n\n[1]\nINFO: task syz.0.17:5995 blocked for more than 143 seconds.\nCall Trace:\n inode_lock_nested include/linux/fs.h:1073 [inline]\n __start_dirop fs/namei.c:2923 [inline]\n start_dirop fs/namei.c:2934 [inline]"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.4,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The vulnerable ext4 path is reachable through VFS mkdir/mknod/xattr operations, and the same operations can be driven remotely through in-kernel file servers such as ksmbd or nfsd on an ext4-backed writable export. A network-accessible writable share is a reasonable severe deployment scenario.\nAC:L - No race or probabilistic exploitation condition is required; once the affected ext4 state exists, the attacker can repeatedly drive the create/xattr sequence that reaches the stale extent mapping. The attacker controls the filesystem operations that trigger the hang.\nPR:N - In the most severe reasonable deployment, a guest/anonymous writable network export can expose the needed create operations without prior authentication. Locally, the same path only needs ordinary write permission on the directory, not kernel capabilities.\nUI:N - The attacker can trigger the vulnerable operations directly by issuing filesystem requests. No separate victim action is required in the network-export scenario.\nS:U - The impact remains within the Linux kernel/filesystem security authority. There is no VM escape, IOMMU bypass, or other cross-scope boundary crossing.\nC:L - The stale block aliasing can cause filesystem metadata/xattr contents to be interpreted through the wrong object, giving a plausible limited metadata disclosure risk. It is not a kernel memory arbitrary-read primitive.\nI:H - The bug creates a double-use physical block situation where directory and xattr metadata share the same buffer, allowing attacker-driven filesystem operations to corrupt security-relevant filesystem metadata. Given uncertainty about controllability of the aliased xattr block, the higher severity integrity value is selected.\nA:H - The observed failure is an infinite loop while holding inode locks, causing hung tasks for more than 143 seconds and repeatable filesystem denial of service. Kernel hung-task/deadlock conditions are high availability impact."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:22:38.829Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/c66545e83a802c3851d9be27a41c0479dd29ff0c"
},
{
"url": "https://git.kernel.org/stable/c/ecc50bfca9b5c2ee6aeef998181689b80477367b"
},
{
"url": "https://git.kernel.org/stable/c/3a7667595bcad84da53fc156a418e110267c3412"
},
{
"url": "https://git.kernel.org/stable/c/416c86f30f91b4fb2642ef6b102596ca898f41a5"
},
{
"url": "https://git.kernel.org/stable/c/64f425b06b3bea9abc8977fd3982779b3ad070c9"
},
{
"url": "https://git.kernel.org/stable/c/5422fe71d26d42af6c454ca9527faaad4e677d6c"
}
],
"title": "ext4: avoid infinite loops caused by residual data",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31448",
"datePublished": "2026-04-22T13:53:44.129Z",
"dateReserved": "2026-03-09T15:48:24.091Z",
"dateUpdated": "2026-11-10T12:44:23.293Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…