CVE-2026-120033 (GCVE-0-2026-120033)
Vulnerability from cvelistv5 – Published: 2026-11-12 18:07 – Updated: 2026-11-14 14:46
VLAI
EPSS
VEX
Title
frr: bgpd Send Hold Timer expiry bypasses the FSM, leaving a phantom Established session or crashing bgpd with Graceful Restart
Summary
In FRRouting, bgpd does not correctly close a BGP session when the Send Hold Timer (RFC 9687) expires, i.e. when a neighbor has stopped accepting data from the router for twice the hold time. The connection is closed, but bgpd still considers the session to be up. A BGP neighbor that keeps sending KEEPALIVEs but stops reading from its connection, at a time when the router has a large amount of data to send to it (for example while sending it a full routing table), can trigger this. If the neighbor announced Graceful Restart support, bgpd crashes shortly after the session is closed, taking down all BGP sessions on the router, and the neighbor can repeat this each time bgpd restarts. Otherwise, the session stays stuck in the Established state: the neighbor's routes stay installed and keep being advertised to other peers, and the neighbor cannot reconnect until an operator clears the session manually. The neighbor does not need to be malicious; an overloaded or stuck peer can trigger the same behavior. No special configuration is required: any established BGP neighbor can trigger the issue, and Graceful Restart helper mode, which leads to the crash, is enabled by default.
Severity
CWE
References
1 reference
| URL | Tags |
|---|---|
| https://github.com/FRRouting/frr/pull/23945/chang… | patch |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| frrouting | frrouting |
Affected:
4967bf6d729d7dd14dff7b672b2fd4afe78a0d86 , < *
(git)
Affected: 10.1.0 , < 10.4.6 (semver) Affected: 10.5.0 , < 10.5.6 (semver) Affected: 10.6.0 , < 10.6.3 (semver) Affected: 10.7.0 , < 10.7.2 (semver) cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:* cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:* cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:* cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:* |
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"modules": [
"bgpd"
],
"product": "frrouting",
"programFiles": [
"bgpd/bgp_fsm.c"
],
"programRoutines": [
{
"name": "bgp_event_stop_with_notify"
}
],
"repo": "https://github.com/FRRouting/frr/",
"vendor": "frrouting",
"versions": [
{
"changes": [
{
"at": "57a7f3eb48837359d6e3ee5ebd4acea8f49320e5",
"status": "unaffected"
}
],
"lessThan": "*",
"status": "affected",
"version": "4967bf6d729d7dd14dff7b672b2fd4afe78a0d86",
"versionType": "git"
},
{
"lessThan": "10.4.6",
"status": "affected",
"version": "10.1.0",
"versionType": "semver"
},
{
"lessThan": "10.5.6",
"status": "affected",
"version": "10.5.0",
"versionType": "semver"
},
{
"lessThan": "10.6.3",
"status": "affected",
"version": "10.6.0",
"versionType": "semver"
},
{
"lessThan": "10.7.2",
"status": "affected",
"version": "10.7.0",
"versionType": "semver"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:*",
"versionEndExcluding": "10.4.6",
"versionStartIncluding": "10.1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:*",
"versionEndExcluding": "10.5.6",
"versionStartIncluding": "10.5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:*",
"versionEndExcluding": "10.6.3",
"versionStartIncluding": "10.6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:frrouting:frrouting:*:*:*:*:*:*:*:*",
"versionEndExcluding": "10.7.2",
"versionStartIncluding": "10.7.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "OR"
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "Srinivasan Koona Lokabiraman \u003csrinivasan@nexthop.ai\u003e (not reported as security issue)"
},
{
"lang": "en",
"type": "tool",
"value": "Anthropic OSS-scanner (re-report, ANT-2026-GSLEN9XB)"
}
],
"descriptions": [
{
"lang": "en",
"value": "In FRRouting, bgpd does not correctly close a BGP session when the Send Hold Timer (RFC 9687) expires, i.e. when a neighbor has stopped accepting data from the router for twice the hold time. The connection is closed, but bgpd still considers the session to be up. A BGP neighbor that keeps sending KEEPALIVEs but stops reading from its connection, at a time when the router has a large amount of data to send to it (for example while sending it a full routing table), can trigger this. If the neighbor announced Graceful Restart support, bgpd crashes shortly after the session is closed, taking down all BGP sessions on the router, and the neighbor can repeat this each time bgpd restarts. Otherwise, the session stays stuck in the Established state: the neighbor\u0027s routes stay installed and keep being advertised to other peers, and the neighbor cannot reconnect until an operator clears the session manually. The neighbor does not need to be malicious; an overloaded or stuck peer can trigger the same behavior. No special configuration is required: any established BGP neighbor can trigger the issue, and Graceful Restart helper mode, which leads to the crash, is enabled by default."
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NO",
"Recovery": "AUTOMATIC",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "NETWORK",
"baseScore": 6,
"baseSeverity": "MEDIUM",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "LOW",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "LOW",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:N/VI:L/VA:H/SC:N/SI:L/SA:L/AU:N/R:A",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "LOW",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-617",
"description": "CWE-617 Reachable Assertion",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-372",
"description": "CWE-372 Incomplete Internal State Distinction: Send Hold Timer expiry tears down the connection outside the BGP FSM, leaving it in the Established state without a socket",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-14T14:46:55.176Z",
"orgId": "57a55968-44ac-464c-a794-6ba3baad09c4",
"shortName": "NetDEF"
},
"references": [
{
"tags": [
"patch"
],
"url": "https://github.com/FRRouting/frr/pull/23945/changes/57a7f3eb48837359d6e3ee5ebd4acea8f49320e5"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "frr: bgpd Send Hold Timer expiry bypasses the FSM, leaving a phantom Established session or crashing bgpd with Graceful Restart",
"workarounds": [
{
"lang": "en",
"value": "No configuration workaround fully prevents the issue. Monitor bgpd logs for \"has not made any SendQ progress for 2 holdtimes\" and run \"clear bgp \u003cneighbor\u003e\" for the affected neighbor, which raises a real FSM event and recovers the peer (this does not prevent the abort when Graceful Restart was negotiated, if the restart timer fires first)."
}
],
"x_generator": {
"engine": "vim"
}
}
},
"cveMetadata": {
"assignerOrgId": "57a55968-44ac-464c-a794-6ba3baad09c4",
"assignerShortName": "NetDEF",
"cveId": "CVE-2026-120033",
"datePublished": "2026-11-12T18:07:42.693Z",
"dateReserved": "2026-10-30T18:11:52.731Z",
"dateUpdated": "2026-11-14T14:46:55.176Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-120033",
"date": "2026-11-16",
"epss": "0.00294",
"percentile": "0.22244"
},
"microsoft_vex": {
"current_release_date": "2026-11-15T01:04:37.000Z",
"cve": "CVE-2026-120033",
"id": "msrc_CVE-2026-120033",
"initial_release_date": "2026-11-13T20:58:42.000Z",
"product_status:known_affected": "1",
"product_status:under_investigation": "1",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "frr: bgpd Send Hold Timer expiry bypasses the FSM, leaving a phantom Established session or crashing bgpd with Graceful Restart",
"url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-120033.json",
"version": "2"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"modules": [
"bgpd"
],
"product": "frrouting",
"programFiles": [
"bgpd/bgp_fsm.c"
],
"programRoutines": [
{
"name": "bgp_event_stop_with_notify"
}
],
"repo": "https://github.com/FRRouting/frr/",
"vendor": "frrouting",
"versions": [
{
"changes": [
{
"at": "57a7f3eb48837359d6e3ee5ebd4acea8f49320e5",
"status": "unaffected"
}
],
"lessThan": "*",
"status": "affected",
"version": "4967bf6d729d7dd14dff7b672b2fd4afe78a0d86",
"versionType": "git"
},
{
"lessThan": "10.4.6",
"status": "affected",
"version": "10.1.0",
"versionType": "semver"
},
{
"lessThan": "10.5.6",
"status": "affected",
"version": "10.5.0",
"versionType": "semver"
},
{
"lessThan": "10.6.3",
"status": "affected",
"version": "10.6.0",
"versionType": "semver"
},
{
"lessThan": "10.7.2",
"status": "affected",
"version": "10.7.0",
"versionType": "semver"
}
]
}
],
"source": "57a55968-44ac-464c-a794-6ba3baad09c4"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In FRRouting, bgpd does not correctly close a BGP session when the Send Hold Timer (RFC 9687) expires, i.e. when a neighbor has stopped accepting data from the router for twice the hold time. The connection is closed, but bgpd still considers the session to be up. A BGP neighbor that keeps sending KEEPALIVEs but stops reading from its connection, at a time when the router has a large amount of data to send to it (for example while sending it a full routing table), can trigger this. If the neighbor announced Graceful Restart support, bgpd crashes shortly after the session is closed, taking down all BGP sessions on the router, and the neighbor can repeat this each time bgpd restarts. Otherwise, the session stays stuck in the Established state: the neighbor\u0027s routes stay installed and keep being advertised to other peers, and the neighbor cannot reconnect until an operator clears the session manually. The neighbor does not need to be malicious; an overloaded or stuck peer can trigger the same behavior. No special configuration is required: any established BGP neighbor can trigger the issue, and Graceful Restart helper mode, which leads to the crash, is enabled by default."
}
],
"id": "CVE-2026-120033",
"lastModified": "2026-11-14T15:16:57.373",
"metrics": {
"cvssMetricV40": [
{
"cvssData": {
"Automatable": "NO",
"Recovery": "AUTOMATIC",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "NETWORK",
"availabilityRequirement": "NOT_DEFINED",
"baseScore": 6.0,
"baseSeverity": "MEDIUM",
"confidentialityRequirement": "NOT_DEFINED",
"exploitMaturity": "NOT_DEFINED",
"integrityRequirement": "NOT_DEFINED",
"modifiedAttackComplexity": "NOT_DEFINED",
"modifiedAttackRequirements": "NOT_DEFINED",
"modifiedAttackVector": "NOT_DEFINED",
"modifiedPrivilegesRequired": "NOT_DEFINED",
"modifiedSubAvailabilityImpact": "NOT_DEFINED",
"modifiedSubConfidentialityImpact": "NOT_DEFINED",
"modifiedSubIntegrityImpact": "NOT_DEFINED",
"modifiedUserInteraction": "NOT_DEFINED",
"modifiedVulnAvailabilityImpact": "NOT_DEFINED",
"modifiedVulnConfidentialityImpact": "NOT_DEFINED",
"modifiedVulnIntegrityImpact": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "LOW",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "LOW",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:N/VI:L/VA:H/SC:N/SI:L/SA:L/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:N/R:A/V:X/RE:X/U:X",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "LOW",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"source": "57a55968-44ac-464c-a794-6ba3baad09c4",
"type": "Secondary"
}
]
},
"published": "2026-11-12T19:16:48.393",
"references": [
{
"source": "57a55968-44ac-464c-a794-6ba3baad09c4",
"url": "https://github.com/FRRouting/frr/pull/23945/changes/57a7f3eb48837359d6e3ee5ebd4acea8f49320e5"
}
],
"sourceIdentifier": "57a55968-44ac-464c-a794-6ba3baad09c4",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-372"
},
{
"lang": "en",
"value": "CWE-617"
}
],
"source": "57a55968-44ac-464c-a794-6ba3baad09c4",
"type": "Secondary"
}
]
}
},
"suse_vex": {
"aggregate_severity": "important",
"current_release_date": "2026-11-14T17:24:28Z",
"cve": "CVE-2026-120033",
"id": "CVE-2026-120033",
"initial_release_date": "2026-11-13T17:39:51Z",
"product_status:known_affected": "88",
"product_status:known_not_affected": "422",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-120033",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-120033.json",
"version": "3"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…